(2019-05-06, 10:24)Krismyklebust Wrote:

(2019-05-06, 00:58)jurialmunkey Wrote:

(2019-05-05, 20:28)Krismyklebust Wrote: 2) In Kodi I'm using "local information" only and the Emby addon. The Emby server has different scrapers; tmdb, omdb, tvdb, but it doesn't specifically say which one is used to get the IMDB ratings. The ratings are there in Estuary and also in Embuary (just checked).  

Do you have userrating set to 0? Because that would override the rating. The other issue might be if Emby is putting a non-numeric value in ListItem.Rating

Wait - are you saying that the number rating next to the imdb icon is missing? Or are you saying that the star rating is blank? I'm talking about the star rating. If you are talking about the imdb icon rating, you need to set up skin helper properly for that. See first post for details. 

The latter is correct - The IMDB icon with the number rating next to it is missing for TV shows. I'll have a look at the first page again, I might have missed something. Hopefully I haven't wasted your time, but I'll report back after work when I've had a look. Thanks!

(2019-05-06, 22:01)drinfernoo Wrote:

(2019-05-06, 21:08)NinjaMonkeyUK Wrote: In my advancedsettings.xml I use:

xml:


<videolibrary>

  <itemseparator> / </itemseparator>

</videolibrary>

However, this doesn't work with Arctic: Zephyr 2 as the genres are separated by "/" rather than my custom setting.  Is this hardcoded or can it be swapped out for code that looks to the advancedsettings.xml setting?

It appears that you're actually setting it to be... "/".         

xml:


<videolibrary>

  <itemseparator> | </itemseparator>

</videolibrary>

(2019-05-06, 02:15)proxymatt Wrote: I'm not sure the changes to Video OSD make sense; what system do you test on?

With the default remote layout on my Nvidia Shield it is really difficult to see the finish time; you have to choose between wanting to see the full plot/poster and your new simple view with finish time.

Currently when pressing the centre button you get play controls and press up for the plot/poster; can you add the finish time to both of those overlays?

Currently when you long press the centre button the video pauses and displays basic title info without controls; that is when I would show your new simple view.

(2019-05-05, 10:34)NinjaMonkeyUK Wrote: @jurialmunkey, this skin is simply amazing!

Please consider adding aspect ratio to the set of icons at the bottom right of the screen, between video codec and audio codec.  I would argue that this information is far more important than the video codec so it should be there.

The reason I need this information readily available is that I use a scope (2.35:1) screen for my projector, so I need to decide which lens memory to set it to (1.78, 1.85, 2.20, 2.35, etc) before watching the movie.  Having this info on the main screen alongside video and audio codecs would be really helpful, and is a feature I sorely miss from the original Arctic: Zephyr skin!

If necessary, I can make the relevant icons if you let me know what resolution and format (I assume PNG) you need them in.

(2019-05-06, 07:37)loeffelpan Wrote:

(2019-05-06, 00:46)jurialmunkey Wrote:

(2019-05-05, 17:33)loeffelpan Wrote: That looks pretty nice.
Thanks. But I think to be more consequent you should keep the old pause seekbar with the title bottom middle.

For esthetic reasons you should rename the option (it’s not just the seeking bar) and maybe you could color the „dot“ between time and endtime like the dots in the seeking/pause label. 

in 0.9.31-a8, I reconfigured the options a bit:
The options are now:
- Always display on-screen info
- Simple on-screen info (hide poster and plot)

Both options can now be selected together. 

I like the way you did it now.
Thank you.

Maybe you shoud color the "dot" between time and endtime like in other OSD labels.
Includes_Label.xml, Lines 112 and 113 -> $INFO[System.Time,$LOCALIZE[555]  ,]$INFO[Player.FinishTime,[COLOR=panel_fg_100][COLOR=panel_fg_30]  •  [/color]$LOCALIZE[31106] ,[/COLOR]]

(2019-05-06, 10:52)loeffelpan Wrote: After changing my homescreen widgets I am a bit confused.
For TVshows I use a landscape widget for "In-progress TV shows", but its the same in other widgets.
 

1. As to see in my screenshot in landscape widgets A:Z2 uses fanart with clearlogo in bottom right corner.
   Fanarts are in the backgound as well, so it's used twice. Shouldn't this be thumbs instead of fanarts?
   This is the same in any library view with landscape pictures.
   
   
2. In selected mode (see screenshot) there is the rating, a date (of the first episode) and (what should be where the red box is?).
   I would expect rating, year (not date), watched episodes and maybe status like in other views.
   Same label is used in the tri-panel view in TV show library.
   
   
   
   
3. In any other view (with info text) the info line shows also the date of the first episode when selecting a whole season.
   As mentioned above I would expect rating, year (not date), watched episodes and maybe status.
   
   
   
   
4. In my movie widget (unwatched movies) the ratings are missing.
   TVDB and IMDB are selected in options. Don't know if this is an issue in other widget types.
   
   
   

(2019-05-06, 11:05)NinjaMonkeyUK Wrote:

(2019-05-06, 00:16)jurialmunkey Wrote:

(2019-05-05, 13:23)NinjaMonkeyUK Wrote: What is the video flag that is needed for MVC discs?  Any discs that are 3D are encoded using MVC rather than AVC / VC-1 and at the moment these don't show an icon in the bottom right of the window.

Can you disable codecs in skin settings and then open info for the movie. It should tell you what the codec name is there (near language and studio info). If you tell me what that is, then I can add a flag. 

My 3D Blu-rays are stored in the library using disc stubs, i.e. I am not scraping against ISO / MKV files.  I include an NFO with each movie and set the video format in there to "MVC".  The Kodi documentation (here) states:

Quote:Shows the video codec of the currently selected video (common values: 3iv2, avc1, div2, div3, divx, divx 4, dx50, flv, h264, microsoft, mp42, mp43, mp4v, mpeg1video, mpeg2video, mpg4, rv40, svq1, svq3, theora, vp6f, wmv2, wmv3, wvc1, xvid)

No mention of MVC but then I don't know if that is because the list is of common values (i.e. not exhaustive) or if it is because MVC might just be seen as an extension of AVC.

I can effectively put anything between the video <codec></codec> tags in my NFO file, so for example it could just be MVC or it could be AVC-MVC or something like that.  Is there anywhere that lists all the supported codecs that Kodi recognises?  I might be barking up the wrong tree if Kodi simply sees MVC format as AVC.

(2019-05-06, 15:12)cereyanli Wrote:

(2019-04-17, 14:48)cereyanli Wrote: @jurialmunkey  would it possible to add "subtitle offset" directly in to subtitle button on OSD Menu. I did that with a little bit hacking the script on v1 but I am not sure whether it will workv2 and it would be good if this comes by default.

Thanks for considering it

@jurialmunkey  have you seen my question ? Thanks for your time

(2019-05-06, 21:08)NinjaMonkeyUK Wrote: In my advancedsettings.xml I use:

 / :


<videolibrary>

  <itemseparator> / </itemseparator>

</videolibrary>

However, this doesn't work with Arctic: Zephyr 2 as the genres are separated by "/" rather than my custom setting.  Is this hardcoded or can it be swapped out for code that looks to the advancedsettings.xml setting?

(2019-05-07, 00:45)NinjaMonkeyUK Wrote:

(2019-05-05, 10:34)NinjaMonkeyUK Wrote: @jurialmunkey, this skin is simply amazing!

Please consider adding aspect ratio to the set of icons at the bottom right of the screen, between video codec and audio codec.  I would argue that this information is far more important than the video codec so it should be there.

The reason I need this information readily available is that I use a scope (2.35:1) screen for my projector, so I need to decide which lens memory to set it to (1.78, 1.85, 2.20, 2.35, etc) before watching the movie.  Having this info on the main screen alongside video and audio codecs would be really helpful, and is a feature I sorely miss from the original Arctic: Zephyr skin!

If necessary, I can make the relevant icons if you let me know what resolution and format (I assume PNG) you need them in.

Further to this, I have created a set of 64x64 aspect ratio icons which I can upload to wherever necessary to get this feature added. 

(2019-03-17, 10:13)pirlone Wrote: congrats for really great work. 
can you consider to add extra two buttons in the Program Information of the PVR, that interacts with  IPTV Recorder add on:  IPTV Recorder button   and  Recordings button ? The buttons should show up only if add-on is installed

tia

(2019-05-07, 00:39)jurialmunkey Wrote:

(2019-05-06, 02:15)proxymatt Wrote: I'm not sure the changes to Video OSD make sense; what system do you test on?

With the default remote layout on my Nvidia Shield it is really difficult to see the finish time; you have to choose between wanting to see the full plot/poster and your new simple view with finish time.

Currently when pressing the centre button you get play controls and press up for the plot/poster; can you add the finish time to both of those overlays?

Currently when you long press the centre button the video pauses and displays basic title info without controls; that is when I would show your new simple view.

My loungeroom hardware is:
HTPC: Core 2 Duo, 2gb ram, Radeon HD5450, LibreElec.
TV: TCL 50" 4k (though my graphics card can only output 1080p)
REMOTE: HP MCE Receiver and Remote

I've had this HTPC hardware since before Shields and RPis were even a thing.

Kodi is designed with a seven button remote in mind (Dpad, OK, Back, Info) and so are my skins. You can get by on a six button remote, but without an info button navigation is considerably more difficult and you miss out on a number of basic kodi functions (for instance, toggling onscreen info).

Also, I haven't changed anything regarding the onscreen info layout with default settings. All I changed was I added the title to the option that disables poster and plot. 

(2019-05-06, 23:35)jurialmunkey Wrote:

(2019-05-06, 10:24)Krismyklebust Wrote:

(2019-05-06, 00:58)jurialmunkey Wrote: Do you have userrating set to 0? Because that would override the rating. The other issue might be if Emby is putting a non-numeric value in ListItem.Rating

Wait - are you saying that the number rating next to the imdb icon is missing? Or are you saying that the star rating is blank? I'm talking about the star rating. If you are talking about the imdb icon rating, you need to set up skin helper properly for that. See first post for details. 

The latter is correct - The IMDB icon with the number rating next to it is missing for TV shows. I'll have a look at the first page again, I might have missed something. Hopefully I haven't wasted your time, but I'll report back after work when I've had a look. Thanks!  

Sorry, my mistake. I was only showing imdb from skinhelper for movies. Glad I clarified as I assumed you were talking about some completely different issue. Fixed in latest release:
https://github.com/jurialmunkey/skin.arctic.zephyr.2/archive/skin.arctic.zephyr.2-v0.9.32-alpha1.zip