(2015-12-13, 22:00)VirtualRain Wrote:

(2015-12-13, 21:26)fritsch Wrote: Average Joe should buy a FireTV ...

Haha... In post #2 it mentions beginner Isenguard OE build is for every day joe, just wondering if that's still the case.

(2015-12-13, 11:08)fritsch Wrote: I got a N3150 - it's working cool and does not overheat - even when I watch kodi 1080i50 + compile on 4 cores ... it stays much cooler than my selfbuild asrock system ... it seems the engineers did very good with the cooling solution. One thing (this is a preseries release) I asked them was to add "power on by USB" if possible as this device does not have an IR remote ... that way power on from off would be working.

(2015-12-14, 07:24)psysfaction Wrote:

(2015-12-13, 11:08)fritsch Wrote: I got a N3150 - it's working cool and does not overheat - even when I watch kodi 1080i50 + compile on 4 cores ... it stays much cooler than my selfbuild asrock system ... it seems the engineers did very good with the cooling solution. One thing (this is a preseries release) I asked them was to add "power on by USB" if possible as this device does not have an IR remote ... that way power on from off would be working.

Thank you for the info.
Yes the power on by USB would be very good.
The AsRock Beebox power on & off great with the Logitech Harmony remote.

Do you know when the Minix Brasswell will be released?

Ps: My Beebox runs great with your Isenguard build. Using it every day and tested various Hevc and 4K content :-)

(2015-12-13, 09:31)fritsch Wrote:

(2015-12-13, 03:46)robo989 Wrote: ^ Had to do that too on broadwell/nuc
libxcb-util0 is missing when going to install the extra bits. Followed guide to the letter.
Resolved through steps listed above.

Funny - I did that howto again myself 3 days ago to test the new Minix Braswell box ... good that it is easy to solve.

(2015-12-14, 10:23)DJ-1 Wrote:

(2015-12-13, 09:31)fritsch Wrote:

(2015-12-13, 03:46)robo989 Wrote: ^ Had to do that too on broadwell/nuc
libxcb-util0 is missing when going to install the extra bits. Followed guide to the letter.
Resolved through steps listed above.

Funny - I did that howto again myself 3 days ago to test the new Minix Braswell box ... good that it is easy to solve.

Yeah i must have been tired or something, as I was trying the Intel driver from top of post 2 which is meant for ppl on 15.04..
As I'm using 15.10 (from post 1), when installing intel driver xserver-xorg-video-intel_2.99.917 git151026193 from near end of post 2 I don't get that 'missing dependencies error'.

Do I install thelibxcb-util0 regardless as it didn't give any missing dependencies errors?

Cheers

(2015-12-13, 19:34)jteeuw Wrote:

(2015-12-13, 14:29)fritsch Wrote:

(2015-12-13, 12:45)jteeuw Wrote: Hi ,

I did a fresh install and followed the how to from page one, everything is working perfecty but when watching Live TV I have green frames ,about 3 green frames per minute.
Can somebody tell from the logs I my setup is good?

dpkg -l |grep mesa | pastebinit
http://paste.ubuntu.com/13987283/

DISPLAY=:0 vainfo | pastebinit
libva info: VA-API version 0.38.0
libva info: va_getDriverName() returns 0
libva info: Trying to open /usr/lib/x86_64-linux-gnu/dri/i965_drv_video.so
libva info: Found init function __vaDriverInit_0_38
libva info: va_openDriver() returns 0
http://paste.ubuntu.com/13987289/

cat /home/kodi/.kodi/temp/kodi.log | pastebinit
http://paste.ubuntu.com/13987306/

dmesg | pastebinit
http://paste.ubuntu.com/13987307/

Not a Debug Log - can you test without tvheadend? What about recordings?

I have it with live tv and (tv) recordings other files not .

here is my debug log :

cat /home/kodi/.kodi/temp/kodi.log | pastebinit
http://paste.ubuntu.com/13992295/

(2015-12-14, 18:45)Devil-Strike Wrote: Goed job guys, can even watch 2160p on baytrail without problems also hi10p works perfect(only software mode) but is there something wrong with not reading of hwdb files? with latest kodi 15.2 mele f10 remotes works perfect with a hwdb file I use but since openelec/kodi 16 and up is not working/not reading hwdb file andso not working.

Some1 know how to fix this?

(2015-12-14, 05:05)Karnis Wrote:

(2015-12-13, 22:00)VirtualRain Wrote:

(2015-12-13, 21:26)fritsch Wrote: Average Joe should buy a FireTV ...

Haha... In post #2 it mentions beginner Isenguard OE build is for every day joe, just wondering if that's still the case.

That build is okay if you want to run Isengard.

If you want a stable version of Jarvis, I run Milhouse #1119 on both my OE boxes and they work quite well for me....check the other thread.

(2015-12-14, 20:04)ilovethakush Wrote: Third question, for everyone. Are Milhouses builds EGL or no? Any reason someone would choose to run his generic version on a chromebox over fritsch builds?

(2015-12-14, 20:04)ilovethakush Wrote:

(2015-12-14, 05:05)Karnis Wrote:

(2015-12-13, 22:00)VirtualRain Wrote: Haha... In post #2 it mentions beginner Isenguard OE build is for every day joe, just wondering if that's still the case.

That build is okay if you want to run Isengard.

If you want a stable version of Jarvis, I run Milhouse #1119 on both my OE boxes and they work quite well for me....check the other thread.

First of all, there is no such thing as a stable version of Jarvis YET.

Second of all, why would you recommend running the 1119 build when there's 1121, 1125, 1127, 1128, 1201, 1205, 1206, 1208, 1211, and 1212 after that?

Third question, for everyone. Are Milhouses builds EGL or no? Any reason someone would choose to run his generic version on a chromebox over fritsch builds?

And now finally to answer the question, for an average joe, just run the Isengard version from this thread, cause that is the latest official stable version of Kodi and you wont have to constantly update.

(2015-12-14, 18:59)stefansaraev Wrote:

(2015-12-14, 18:45)Devil-Strike Wrote: Goed job guys, can even watch 2160p on baytrail without problems also hi10p works perfect(only software mode) but is there something wrong with not reading of hwdb files? with latest kodi 15.2 mele f10 remotes works perfect with a hwdb file I use but since openelec/kodi 16 and up is not working/not reading hwdb file andso not working.

Some1 know how to fix this?

re hwdb

it is upstream (systemd) change.

old format: keyboard:usb:vXXXXpYYYY*
new format: evdev:input:b0003vXXXXpYYYY*

example:

Code:

# mele F10 deluxe
# keyboard:usb:v1915p0196*
evdev:input:b0003v1915p0196*
KEYBOARD_KEY_07003f=f1  # Game
KEYBOARD_KEY_070043=f2  # My Box
...

Code:

# mele F10 Remote
# keyboard:usb:v1915pAF11*
evdev:input:b0003v1915pAF11*
KEYBOARD_KEY_090001=enter
KEYBOARD_KEY_090002=f5
...