(2019-11-04, 18:12)Adammay20 Wrote: Hi again Jurial,

Thanks for your previous response you had to my questions. I have came across a few more I wanted to ask! 

1. On the very first page of this post/forum, (Your introduction) Where it says "Recently added & Recently played" how did you make it to be a dark grey colour? Mine is a light grey by default and when I hover it, it goes dark grey. I would like it to be dark grey like yours all the time.

2. I have a widget on my movies panel that shows "Trending movies" I set the aspect/view to landscape I believe. How do I get the logos of the movie on the images/landscape thumbnails? I have seen people screenshot it before on here – but I wasn't sure how to get it.

3. When I hover a movie/tv show, how do I get the codex info to show up in the bottom right hand corner? I know it shows if you view "Information" on the movie, but I have seen someone else that has posted with it showing up in the bottom corner when they are hovering a movie for example.

4. This might not be possible because I'm on a shield, but....Is their a quicker way to view the "Information" on a tv show/movie. Cause right now – I hover the film and hold the centre button on my remote for like 2 seconds and scroll down and click information. Can we click like a directional button or something to view the information on the film?

Thank you for your time answering my questions!

(2019-11-05, 07:17)drinfernoo Wrote:

(2019-11-04, 18:12)Adammay20 Wrote: Hi again Jurial,

Thanks for your previous response you had to my questions. I have came across a few more I wanted to ask! 

1. On the very first page of this post/forum, (Your introduction) Where it says "Recently added & Recently played" how did you make it to be a dark grey colour? Mine is a light grey by default and when I hover it, it goes dark grey. I would like it to be dark grey like yours all the time.

2. I have a widget on my movies panel that shows "Trending movies" I set the aspect/view to landscape I believe. How do I get the logos of the movie on the images/landscape thumbnails? I have seen people screenshot it before on here – but I wasn't sure how to get it.

3. When I hover a movie/tv show, how do I get the codex info to show up in the bottom right hand corner? I know it shows if you view "Information" on the movie, but I have seen someone else that has posted with it showing up in the bottom corner when they are hovering a movie for example.

4. This might not be possible because I'm on a shield, but....Is their a quicker way to view the "Information" on a tv show/movie. Cause right now – I hover the film and hold the centre button on my remote for like 2 seconds and scroll down and click information. Can we click like a directional button or something to view the information on the film?

Thank you for your time answering my questions!

1. Which part are you referring to? If you mean the light vs. dark themes, they can be changed from

Code:

Settings -> Interface Settings -> Skin -> Colours

2. As long as your content has clearlogos, they should show up. If you want landscape (moviethumb and tvthumb on Fanart.tv) artwork instead of fanart, you can turn that in skin-wide from

Code:

Settings -> Skin Settings -> Library -> Landscape art

3. That one is at

Code:

Settings -> Skin Settings -> Furniture -> Codec flags

4. No, unfortunately. In PC versions, the default key is 'I', so if you could map that to a button it would work, though. Problem is, for you, myself, and many others, that while many third-party remotes have either programmable buttons or a dedicated info button, the Shield remote doesn't have any mappable buttons at all. Luckily the new Shield does have quite a few more buttons on its remote, so it's possible that may improve this experience for Shield users into the future.

Regarding 1, 2, and 3, just take a look in the settings. There's all kinds of neat stuff in there

(2019-11-02, 23:06)jurialmunkey Wrote:

(2019-11-02, 12:49)NinjaMonkeyUK Wrote: I've spotted a bug on the home screen:

How are you getting this to occur? I can't recreate it. 

(2019-11-05, 20:36)webmaher Wrote: i cant install skin to Kodi Matrix 19.0 HDR https://forum.kodi.tv/showthread.php?tid=345566&pid=2897821#pid2897821
error because dependencies not compatible...
I hope that this not big problem because this is for me best skin ever 

(2019-11-05, 20:36)webmaher Wrote: i cant install skin to Kodi Matrix 19.0 HDR https://forum.kodi.tv/showthread.php?tid=345566&pid=2897821#pid2897821
error because dependencies not compatible...
I hope that this not big problem because this is for me best skin ever 

(2019-11-05, 14:55)Adammay20 Wrote:

(2019-11-05, 07:17)drinfernoo Wrote:

(2019-11-04, 18:12)Adammay20 Wrote: Hi again Jurial,

Thanks for your previous response you had to my questions. I have came across a few more I wanted to ask! 

1. On the very first page of this post/forum, (Your introduction) Where it says "Recently added & Recently played" how did you make it to be a dark grey colour? Mine is a light grey by default and when I hover it, it goes dark grey. I would like it to be dark grey like yours all the time.

2. I have a widget on my movies panel that shows "Trending movies" I set the aspect/view to landscape I believe. How do I get the logos of the movie on the images/landscape thumbnails? I have seen people screenshot it before on here – but I wasn't sure how to get it.

3. When I hover a movie/tv show, how do I get the codex info to show up in the bottom right hand corner? I know it shows if you view "Information" on the movie, but I have seen someone else that has posted with it showing up in the bottom corner when they are hovering a movie for example.

4. This might not be possible because I'm on a shield, but....Is their a quicker way to view the "Information" on a tv show/movie. Cause right now – I hover the film and hold the centre button on my remote for like 2 seconds and scroll down and click information. Can we click like a directional button or something to view the information on the film?

Thank you for your time answering my questions!

1. Which part are you referring to? If you mean the light vs. dark themes, they can be changed from

Code:

Settings -> Interface Settings -> Skin -> Colours

2. As long as your content has clearlogos, they should show up. If you want landscape (moviethumb and tvthumb on Fanart.tv) artwork instead of fanart, you can turn that in skin-wide from

Code:

Settings -> Skin Settings -> Library -> Landscape art

3. That one is at

Code:

Settings -> Skin Settings -> Furniture -> Codec flags

4. No, unfortunately. In PC versions, the default key is 'I', so if you could map that to a button it would work, though. Problem is, for you, myself, and many others, that while many third-party remotes have either programmable buttons or a dedicated info button, the Shield remote doesn't have any mappable buttons at all. Luckily the new Shield does have quite a few more buttons on its remote, so it's possible that may improve this experience for Shield users into the future.

Regarding 1, 2, and 3, just take a look in the settings. There's all kinds of neat stuff in there

Weird, I already had landscape art checked off and the codex flags and both aren’t there.

(2019-11-04, 10:48)maeda Wrote: So many questions, so little time, i feel like the community should help out answering some, if you know the answer, so jurialmunkey doesn't have to answer them all
That been sad, i have one, of course i have, i think it's not related to az2 because it was always here, but on az2 i plan to have the cleanest minimal user experience, this skin is just so awesome it demands it.
I tried to get rid of <ratings> for individual episodes without success, i don't need them and those numbers are only clutter to me. (i use list view)
I use tinymediamanager for all nfos and it scraps <ratings> for all episodes, so is this a skin related at all? maybe i should try to tell tmm not to scrape that info?

and i'm curious about another thing, what exactly triggers little icons for `library` , `unwatched` & `new` for individual episodes, i can't seem to find a pattern

(2019-11-04, 15:12)Tariq77 Wrote: Great to see the option to display your choice of studio/country/language tags has been implemented. Just a heads up...my preference is to only display studios, but the text is being cut off prematurely as a result.

(2019-11-05, 14:55)Adammay20 Wrote:

(2019-11-05, 07:17)drinfernoo Wrote:

(2019-11-04, 18:12)Adammay20 Wrote: Hi again Jurial,

Thanks for your previous response you had to my questions. I have came across a few more I wanted to ask! 

1. On the very first page of this post/forum, (Your introduction) Where it says "Recently added & Recently played" how did you make it to be a dark grey colour? Mine is a light grey by default and when I hover it, it goes dark grey. I would like it to be dark grey like yours all the time.

2. I have a widget on my movies panel that shows "Trending movies" I set the aspect/view to landscape I believe. How do I get the logos of the movie on the images/landscape thumbnails? I have seen people screenshot it before on here – but I wasn't sure how to get it.

3. When I hover a movie/tv show, how do I get the codex info to show up in the bottom right hand corner? I know it shows if you view "Information" on the movie, but I have seen someone else that has posted with it showing up in the bottom corner when they are hovering a movie for example.

4. This might not be possible because I'm on a shield, but....Is their a quicker way to view the "Information" on a tv show/movie. Cause right now – I hover the film and hold the centre button on my remote for like 2 seconds and scroll down and click information. Can we click like a directional button or something to view the information on the film?

Thank you for your time answering my questions!

1. Which part are you referring to? If you mean the light vs. dark themes, they can be changed from

Code:

Settings -> Interface Settings -> Skin -> Colours

2. As long as your content has clearlogos, they should show up. If you want landscape (moviethumb and tvthumb on Fanart.tv) artwork instead of fanart, you can turn that in skin-wide from

Code:

Settings -> Skin Settings -> Library -> Landscape art

3. That one is at

Code:

Settings -> Skin Settings -> Furniture -> Codec flags

4. No, unfortunately. In PC versions, the default key is 'I', so if you could map that to a button it would work, though. Problem is, for you, myself, and many others, that while many third-party remotes have either programmable buttons or a dedicated info button, the Shield remote doesn't have any mappable buttons at all. Luckily the new Shield does have quite a few more buttons on its remote, so it's possible that may improve this experience for Shield users into the future.

Regarding 1, 2, and 3, just take a look in the settings. There's all kinds of neat stuff in there

Weird, I already had landscape art checked off and the codex flags and both aren’t there.

(2019-11-05, 20:15)NinjaMonkeyUK Wrote: Sorry, I should have explained.

My home menu is set to "Basic" and my background widget is a playlist of TV shows (when TV shows menu option is highlighted).

If I press "up" from the main menu, I can then manually move "left" and "right" to navigate between items in the background playlist.  If I then press "OK" to select a show, the dark grey area animates to shift up and fill the screen before switching into the TV show's episode list.  It is at this point that the second screenshot happens. I think it is moving a fixed height overlay up towards the top of the screen, when it should stretch to fill the screen instead (or at least the fixed height overlay should be the height of the screen).

Does that make sense?

(2019-11-02, 23:06)jurialmunkey Wrote:

(2019-11-02, 12:49)NinjaMonkeyUK Wrote: I've spotted a bug on the home screen:

How are you getting this to occur? I can't recreate it. 

(2019-11-06, 00:27)NinjaMonkeyUK Wrote: @jurialmunkey did I describe the bug I've seen well enough in my previous post, or should I try to capture a video of it for you?