(2014-03-08, 23:26)giftie Wrote: Check out CinemaVison's Rating section for updated videos, those found on MediaFire are originally from one of the packs floating around.

(2014-03-09, 04:32)feliche Wrote: Hi,

thank you for the script.

Running XBMC on 13.0-BETA2 Git_20140306

Trying to playback trailer but XBMC gets crash and not further reaction.

My xbmc.log file

Thank you

(2014-03-09, 03:07)jelly Wrote: Do i need to change something to get them to work? I've changed the extensions to .avi but it seems to be only looking for mpaa ratings.

(2014-03-09, 04:36)giftie Wrote: Normally you just need to make sure the setting is pointed to the correct folder. If this is the case, I need a full debug log to see the problem.

(2014-03-09, 05:26)jelly Wrote:

(2014-03-09, 04:36)giftie Wrote: Normally you just need to make sure the setting is pointed to the correct folder. If this is the case, I need a full debug log to see the problem.

I think i've worked out what the issue is, my movies are scraped from TMDB and the format is 'Rated XX', if i remove the 'Rated' they work.

(2014-03-09, 04:32)feliche Wrote: Hi,

thank you for the script.

Running XBMC on 13.0-BETA2 Git_20140306

Trying to playback trailer but XBMC gets crash and not further reaction.

My xbmc.log file

Thank you

(2014-03-10, 00:16)feliche Wrote:

(2014-03-09, 04:32)feliche Wrote: Hi,

thank you for the script.

Running XBMC on 13.0-BETA2 Git_20140306

Trying to playback trailer but XBMC gets crash and not further reaction.

My xbmc.log file

Thank you

Sorry I didn´t present a correct log file I hope now it´s good.

Is this one correct?

XBMC log

Thank you

(2014-03-10, 00:35)giftie Wrote:

(2014-03-10, 00:16)feliche Wrote:

(2014-03-09, 04:32)feliche Wrote: Hi,

thank you for the script.

Running XBMC on 13.0-BETA2 Git_20140306

Trying to playback trailer but XBMC gets crash and not further reaction.

My xbmc.log file

Thank you

Sorry I didn´t present a correct log file I hope now it´s good.

Is this one correct?

XBMC log

Thank you

That is the correct one... Seems to be the increasingly common bug that should be fixed in the next version.

(2014-03-07, 21:49)weirdinin Wrote: Fresh installation didnt make any difference. It seems to me that this is not just the way ce should work since no matter how long I wait, second session with ce fails. I waited 10 minutes after ending of playback. Looks like xbmc stays busy until it's restarted. And it stays busy only if ce has been used. Normal playback of movies doesnt arouse this problem. At least I think so, since xbmc quits fast and nice. But when ce has been used, xbmc wait some time before it ends, which tells that there's something going on that xbmc needs to end before quitting.

One thing that I noticed btw: if I use default settings of dialogvideoinfo.xml of transparency, it takes about 10 seconds before ce starts. I modified file from

Code:

<onclick>Dialog.Close(MovieInformation)</onclick>
                    <onclick>Playlist.Clear</onclick>
                    <onclick>RunScript(script.cinema.experience)</onclick>
                    <visible>Container.Content(Movies) + Skin.HasSetting(CinemaScript_MovieInfo)</visible>

to

Code:

<onclick>Dialog.Close(MovieInformation)</onclick>
                    <onclick>Playlist.Clear</onclick>
                    <onclick>XBMC.RunScript(script.cinema.experience,movieid=$INFO[ListItem.DBID])</onclick>
                    <visible>Container.Content(Movies) + Skin.HasSetting(CinemaScript_MovieInfo)</visible>

The change of one line made the starting of ce much quicker. Perhaps I could make the ending of the script also happen by modifying the xml file. What that line <visible>some code</visible> does? Looks like a trial and error kind of thing if I try to fix this . Well, there's plenty of time, whole night before need to go to work

I assume this issue won't get fixed any time soon so I made a quite dirty workaround:
made a cmd file that kills xbmc.exe after movie theatre outro video. Then eventghost wait couple of seconds and restart xbmc. Quests won't notice the difference since transitions are smooth thanks to fast starting of gotham and to using eventghost as a shell instead of explorer.exe

If you need or want my xbmc debug log, tell me.

(2014-03-14, 19:02)syxrail Wrote:

(2014-03-07, 21:49)weirdinin Wrote: Fresh installation didnt make any difference. It seems to me that this is not just the way ce should work since no matter how long I wait, second session with ce fails. I waited 10 minutes after ending of playback. Looks like xbmc stays busy until it's restarted. And it stays busy only if ce has been used. Normal playback of movies doesnt arouse this problem. At least I think so, since xbmc quits fast and nice. But when ce has been used, xbmc wait some time before it ends, which tells that there's something going on that xbmc needs to end before quitting.

One thing that I noticed btw: if I use default settings of dialogvideoinfo.xml of transparency, it takes about 10 seconds before ce starts. I modified file from

Code:

<onclick>Dialog.Close(MovieInformation)</onclick>
                    <onclick>Playlist.Clear</onclick>
                    <onclick>RunScript(script.cinema.experience)</onclick>
                    <visible>Container.Content(Movies) + Skin.HasSetting(CinemaScript_MovieInfo)</visible>

to

Code:

<onclick>Dialog.Close(MovieInformation)</onclick>
                    <onclick>Playlist.Clear</onclick>
                    <onclick>XBMC.RunScript(script.cinema.experience,movieid=$INFO[ListItem.DBID])</onclick>
                    <visible>Container.Content(Movies) + Skin.HasSetting(CinemaScript_MovieInfo)</visible>

The change of one line made the starting of ce much quicker. Perhaps I could make the ending of the script also happen by modifying the xml file. What that line <visible>some code</visible> does? Looks like a trial and error kind of thing if I try to fix this . Well, there's plenty of time, whole night before need to go to work

I assume this issue won't get fixed any time soon so I made a quite dirty workaround:
made a cmd file that kills xbmc.exe after movie theatre outro video. Then eventghost wait couple of seconds and restart xbmc. Quests won't notice the difference since transitions are smooth thanks to fast starting of gotham and to using eventghost as a shell instead of explorer.exe

If you need or want my xbmc debug log, tell me.

I'm having the exact same issue. I can get CE to start and run first time, but then after hitting Stop on a movie I can't do it again and no amount of waiting seems to fix it. XBMC also cant be closed normally and the process hangs around in the task manager until killed. So it does sound like CE never gets this notification that the playback has ended. Is this a change in XBMC or in the skin possibly? I'm on Gotham Beta1 and using Transparency! as my skin.

(2014-03-14, 23:51)itslilyitslily Wrote: I have read the wiki and a few of the pages in the thread but havent found the answer. I apologise if this feature is already available and if so would be interested how.

I've been thinking it would be good to be able to have either a local library of trailers or a streamable library sorted into year or genre.
CE could then choose trailers at random from the same year the film was made or from the same Year/Genre folder and play them before the movie starts.

Perhaps the trailer websites have a suggestions of similar trailers that could be made use of for the streaming option. Perhaps for the more meticulous even use file tags to differentiate.

Love the plugin already though!

(2014-03-17, 10:00)zebrom Wrote: I noticed in the poll there's the option "trivia intro fixed" I'm guessing this is about the trivia intro video being played and then the menu popping back up for a second before the slides start. I've had this problem on all my setups. (Frodo and Gotham) Is this the problem the poll is referring to, or is it unique to my setups?
If it is a common problem is it being looked into currently?