(2013-04-18, 21:24)Cocotus Wrote: @ CaptainKen, suprnaut

(2013-04-18, 16:07)Suprnaut Wrote: Cocotus,

The sorting on the new html movie export seems to be working now. The problem I have now is that I can not load the generated html fully. When I load it locally from Windows it loads partially and then stops before loading the thumbnails. If I load it from an Apache webserver running on linux the same thing happens, but even less loads, the navigation on the left and right frames never load. I have tried IE, Firefox, and Chrome.

I realize I have a huge collection (over 1200 movies) but everything seemed to work fine before (other than the sorting). My index.htm file is almost 5MB. I assume the issue is a javascript memory issue. Maybe there is a memory leak somewhere? Any ideas?

I tpoo have massive problems like CaptainKen-
Yesterday I tried to build the export template and I couldn't get it working - I ran into Out Of memory exception while saving the preview of my 600 movie collection - This has not happened in an older version pre 11 and I have to investigate whats the cause - I might even disable all the preview cause the loading time really is wayyyyyyyy too long - will report any progress!

(2013-04-18, 06:07)steve1977 Wrote:

(2013-04-17, 01:42)steve1977 Wrote: First of all, thanks a lot for keeping Ember alive. Great to see continued development!

I have one feature request - would be great to have a function that syncs the "Trakt personal lists" with "movie set". In other words, I would like to change my personal "Trakt lists" into a movie set. Alternatively, sync the "Trakt personal list" with "movie playlist", which may be more difficult for Ember to achieve though.

Any thoughts? Thanks a lot for looking into this!!!

Any thoughts on this feature request? This may be in cocotus's interest as I assume he is active on trakt.tv development? Thanks in advance!

(2013-04-18, 21:33)Suprnaut Wrote:

(2013-04-18, 21:24)Cocotus Wrote: @ CaptainKen, suprnaut

(2013-04-18, 16:07)Suprnaut Wrote: Cocotus,

The sorting on the new html movie export seems to be working now. The problem I have now is that I can not load the generated html fully. When I load it locally from Windows it loads partially and then stops before loading the thumbnails. If I load it from an Apache webserver running on linux the same thing happens, but even less loads, the navigation on the left and right frames never load. I have tried IE, Firefox, and Chrome.

I realize I have a huge collection (over 1200 movies) but everything seemed to work fine before (other than the sorting). My index.htm file is almost 5MB. I assume the issue is a javascript memory issue. Maybe there is a memory leak somewhere? Any ideas?

I tpoo have massive problems like CaptainKen-
Yesterday I tried to build the export template and I couldn't get it working - I ran into Out Of memory exception while saving the preview of my 600 movie collection - This has not happened in an older version pre 11 and I have to investigate whats the cause - I might even disable all the preview cause the loading time really is wayyyyyyyy too long - will report any progress!

I had that problem too, when I tried to save the preview to disk it complained about not enough disk space. I figured out that if I first saved the default template to disk then generated the movie export template it would save to disk fine.

(2013-04-18, 22:43)CaptainKen Wrote:

(2013-04-18, 21:33)Suprnaut Wrote:

(2013-04-18, 21:24)Cocotus Wrote: @ CaptainKen, suprnaut

I tpoo have massive problems like CaptainKen-
Yesterday I tried to build the export template and I couldn't get it working - I ran into Out Of memory exception while saving the preview of my 600 movie collection - This has not happened in an older version pre 11 and I have to investigate whats the cause - I might even disable all the preview cause the loading time really is wayyyyyyyy too long - will report any progress!

I had that problem too, when I tried to save the preview to disk it complained about not enough disk space. I figured out that if I first saved the default template to disk then generated the movie export template it would save to disk fine.

@Suprnaut
Not sure what you mean by first saving the template to disk? It's saved when EMM is installed.

What's interesting is that when the preview completes, everything is in the Temp\Export folder perfectly. I was under the impression that Saving simply moved what was already generated in the temp folder to the desired Save folder destination? However, based on the errors, it must be trying to recreate everything in the Save location?

(2013-04-19, 00:32)Cocotus Wrote:

(2013-04-18, 22:43)CaptainKen Wrote:

(2013-04-18, 21:33)Suprnaut Wrote: I had that problem too, when I tried to save the preview to disk it complained about not enough disk space. I figured out that if I first saved the default template to disk then generated the movie export template it would save to disk fine.

@Suprnaut
Not sure what you mean by first saving the template to disk? It's saved when EMM is installed.

What's interesting is that when the preview completes, everything is in the Temp\Export folder perfectly. I was under the impression that Saving simply moved what was already generated in the temp folder to the desired Save folder destination? However, based on the errors, it must be trying to recreate everything in the Save location?

Wow nice find! Indeed the template works perfectly in preview and is generated completely in TEMP Folder - I think I will move the poster/ fanart dimension setting together with new setting "output directory" to Export Movie Template Module settings in Ember, and just generate the template to that directory without showing the windows savedialog to avoid problems

(2013-04-18, 22:43)CaptainKen Wrote:

(2013-04-18, 21:33)Suprnaut Wrote:

(2013-04-18, 21:24)Cocotus Wrote: @ CaptainKen, suprnaut

I tpoo have massive problems like CaptainKen-
Yesterday I tried to build the export template and I couldn't get it working - I ran into Out Of memory exception while saving the preview of my 600 movie collection - This has not happened in an older version pre 11 and I have to investigate whats the cause - I might even disable all the preview cause the loading time really is wayyyyyyyy too long - will report any progress!

I had that problem too, when I tried to save the preview to disk it complained about not enough disk space. I figured out that if I first saved the default template to disk then generated the movie export template it would save to disk fine.

@Suprnaut
Not sure what you mean by first saving the template to disk? It's saved when EMM is installed.

What's interesting is that when the preview completes, everything is in the Temp\Export folder perfectly. I was under the impression that Saving simply moved what was already generated in the temp folder to the desired Save folder destination? However, based on the errors, it must be trying to recreate everything in the Save location?

(2013-04-19, 06:36)Riot504 Wrote: Might I offer a few feature suggestions?

Under filters there is a check box for "Locked." Would it be possible to add one for "Unlocked" as well?

Also would you be willing to add a changelog text file to the rar? It would make it easier to find changes for those that miss a version or two before updating.

Thanks for all your work!

(2013-04-19, 17:57)meridius Wrote: Hi all

thanks for the hard work to the devs who are making this progrma one of the best i have used.

Still bugs in extrathumbs it still will not pick up my own extrathumbs folder when doing a new scrape and when i am finished scraping the movie it deletes my extrathumbs folder and i have to redo them again as ember just does not work with extrthumbs for some reason when you scrape a new movie, its a real pain this one.

another question how many actors do you all scrape ? I have mine set to only get actors with pictures but i noticed one movie nearly got 140 pictures of actors and most of them actors are not even that inportant and wanted to know how do you set yours up

thanks

(2013-04-18, 00:32)deh2k7 Wrote: Hi all, thanks for the update! I'm so happy that there is a dedicated team on EMM again!

I've been testing the latest version and here's the good news:

The fixes from Cocotus on mediainfo and codecs is working well.

Here's the bad news:

Image handling seems to have been broken in this update. Here are some the issues I'm seeing (with multiple movies, not just one):

I can no longer view image previews in the Movies section. Double clicking on an image or clicking on the preview button does nothing.

Image size selection seems to be broken. No image allows you to select 'original'. It would be nice to see the actual resolution (1000x1500, 1920x1080) of the images again, the way it was in v10.

I cannot change the images once they are saved. Batch scraping works fine and saves images, but if you try to update the images for a single movie, or do a single movie rescrape, EMM throws exceptions and does not save the image.

Image previews also seems to be broken in TV as well. The difference is you do get an exception and the image previewer tries to come up but is blank. Doing this in Movies gets you nothing at all.

I'm happy to help with testing, as needed.

(2013-04-19, 18:48)deh2k7 Wrote:

(2013-04-18, 00:32)deh2k7 Wrote: Hi all, thanks for the update! I'm so happy that there is a dedicated team on EMM again!

I've been testing the latest version and here's the good news:

The fixes from Cocotus on mediainfo and codecs is working well.

Here's the bad news:

Image handling seems to have been broken in this update. Here are some the issues I'm seeing (with multiple movies, not just one):

I can no longer view image previews in the Movies section. Double clicking on an image or clicking on the preview button does nothing.

Image size selection seems to be broken. No image allows you to select 'original'. It would be nice to see the actual resolution (1000x1500, 1920x1080) of the images again, the way it was in v10.

I cannot change the images once they are saved. Batch scraping works fine and saves images, but if you try to update the images for a single movie, or do a single movie rescrape, EMM throws exceptions and does not save the image.

Image previews also seems to be broken in TV as well. The difference is you do get an exception and the image previewer tries to come up but is blank. Doing this in Movies gets you nothing at all.

I'm happy to help with testing, as needed.

Dan -

Any thoughts on the image handling issues noted above? Has anyone else seen these issues?

Thanks,
Dave

(2013-04-19, 19:07)deh2k7 Wrote: Dan - what are your image scraper settings? I am currently seeing issues when using the Native Ember scraper for images, not the TMDB one...