(2013-03-29, 11:55)miljbee Wrote: When the remote sleeps and you press a key on it, there is an added delay before PS3BluMote gets the button code. Probably because the btlink state changes. I am not sure but it seems that this delay is longer if the remote is far from the BT dongle.

If the remote is awake, I never get any delay. Even when far from the BT Dongle (But I admit I haven't tried it outside !)


Finally, from what you wrote, I understand that you have a PS3. Have you tried to completely shut it down to be sure that your problems aren't related ?

(2013-03-31, 17:16)therock003 Wrote: Additionally, on the PS3, it seems like the controller is on a continuous state of hibernation, and it responds immediately even if you havent pressed a button for more than half an hour. It almost seems like it works like an IR where it draws power based on keypresses (Well not really just joking, but power management is indeed better).

(2013-03-31, 17:16)therock003 Wrote: I also noticed there's an .xml profile for ps3 here on xbmc, so that means you can have direct internal functionality. Havent tried it thought to see how it behaves when hibernated. I like very much how blumote operates it has suited my needs and how it allowed me to use the ps3 remote on windows so i will continue to use it for a long time.

(2013-03-04, 16:13)miljbee Wrote: Here is PS3BluMote 2.0.4 :
Download It !

This new release brings hibernation feature. Original features have been left untouched (Except logging !)

It can run while eg is running with the PS3Remote plugin. It won't affect the functionnalities of the PS3Remote plugin.

When PS3BluMote is running, it will receive all the keypress from the remote. Each time it receives a keypress from the remote, it will restart it's internal hibernation timer. Once the hibernation timer expires PS3BluMote will hibernate the remote.
When hibernating the remote, it will disable device connected/disconnected sounds, and restore them when the remote will be reconnected.

The method used to hibernate the remote is the same used in BDRemoteSleep and PS3RemoteSleep. If you are familiar with these tools, you know that this method might take some time (up to 20s). While the remote is being hibernated, neither EG nor PS3Blumote will be able to receive keypress.

To setup PS3BluMote :
If you are upgrading from a previous version, backup your settings before upgrading. The upgrade shouldn't affect them, ... but who knows !
To backup your settings, simply go to the settings screen of PS3BluMote, click the blue link to open the log/settings folder and backup the files you will find here.
Close PS3BluMote (right click in the system tray/Exit)

Extract the content of the archive to a folder
Make sure your remote is paired, working and not hibernated (press any key on it)
Launch PS3BluMote.exe

By default, Hibernation is disabled, because it needs the btAddress of the remote to work.
Open the settings (right click the PS3BluMote icon on the system tray then settings).

On the settings screen, the field BT Address should contain the BTAddress of your remote. If the discovery is still running, the field contains "Searching" and is disabled. In this case wait for the discovery to finish.
If the discovery process returns only one address, The bt address field will auto fill with that address, else, it will be blank, and you will have to use the dropdown to access available addresses.

Once a correct value is set for the BTAddress, the hibernation checkbox will be enabled and you will be able to check it. Once checked, Hibernation is active. If you left the default 3 minutes for the delay, your remote will be hibernated 3 minutes later if you don't press any key on it. The timer restarts to 0 if you change the delay.

Once the remote is hibernated, the Tray icon of the PS3BluMote App becomes light Blue.

Please Note that at the moment, PS3BluMote can work with only one remote at a time.
If you have several remotes connected, use BDRemoteSleep to hibernate them selectively.
If you change the vid/pid, you will have to restart the application.

It has been tested on Win7 x64 with and without the sp1, with the Ms BT Stack and Widcomm.
I only own the old remote so I have no idea of what will happen with the new one.

Full source code available on GitHub

Let me know how it works with your setup !

(2013-05-02, 14:54)Kaleido Wrote: Hello,
I've been using the PS3 BD Remote successful in combination with XBMC 12 & PS3BluMote 2.04 on my Windows 8 laptop, up until yesterday.

For unknown reasons the PS3 remote no longer connects.

Obviously I've tried changing the batteries, I even opened a second (different brand) package of batteries to make sure.
I've removed the device from my machine and tried reconnecting, but this only works if I'm repeatedly pressing a button.
If I just try to put it in pairing mode it occasionaly shows up, but then fails to connect.
Since today, I'm not even able to remove the device, it just says "failed to remove".

This remote is hardly 3 months old (model:CECHZR1E) and I've been careful not to drop it or anything.

I really miss the comfort of using my remote, so any help would be greatly appreciated.

PS: other Bluetooth devices connect without problems, I use a Canon X-Mark bluetooth mouse which works like a charm.

(2013-04-18, 07:17)rbroders Wrote: I have been using a PS3 remote (SMK-Link PS3 Blu-Link) with PS3BluMote for a few weeks now and it works pretty well. I have some wierd wake up issues but it essentially works fine.

However, not one to leave well enough alone, I thought I would attempt to get the remote to work with XBMC natively. According to the map files, to do this, you look in XBMC.log and get the remote name and the key ids.

My remote does show up in the log:
22:01:58 T:4284 NOTICE: CJoystick::EnumJoysticksCallback : Enabled Joystick: BD Remote Control
22:01:58 T:4284 NOTICE: CJoystick::EnumJoysticksCallback : Total Axis: 0 Total Hats: 0 Total Buttons: 0

But XBMC doesn't think it has any buttons, and I can't get any key ids to show up in the log (I pressed lots of keys but don't see anything).

Any ideas? Does XBMC need focus to get the joystick keys? I'm pretty sure it had focus, but not positive. I have a two screen system, a toucscreen for automation and my tv for movies. There is no keyboard so ALT-TAB is out. Actually I have a key mapped in PS3BluMote to ALT-TAB so I can give xbmc focus for the remote to work.

Thanks -- Bob

(2013-05-06, 20:33)navigates Wrote: Is there a way to launch applications with the remote app? There is an EXE file for which I created a shortcut but when xbmc launches all shortcuts get disabled.

(2013-03-04, 16:13)miljbee Wrote: Here is PS3BluMote 2.0.4 :
Download It !

Let me know how it works with your setup !

(2013-05-06, 20:33)navigates Wrote: Is there a way to launch applications with the remote app? There is an EXE file for which I created a shortcut but when xbmc launches all shortcuts get disabled.

(2013-05-06, 20:33)navigates Wrote: Is there a way to launch applications with the remote app? There is an EXE file for which I created a shortcut but when xbmc launches all shortcuts get disabled.