Kodi Community Forum
Mod Estuary MOD V2 Matrix/Nexus/Omega KN Edition - Printable Version

+- Kodi Community Forum (https://forum.kodi.tv)
+-- Forum: Support (https://forum.kodi.tv/forumdisplay.php?fid=33)
+--- Forum: Skins Support (https://forum.kodi.tv/forumdisplay.php?fid=67)
+---- Forum: Estuary (https://forum.kodi.tv/forumdisplay.php?fid=260)
+---- Thread: Mod Estuary MOD V2 Matrix/Nexus/Omega KN Edition (/showthread.php?tid=366400)

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84

RE: Estuary MOD V2 Matrix/Nexus KN Edition - Ninodemon - 2023-01-17

I’m having troubles downloading the repo on firestick, is it possible? Also the “download repo addon” isn’t loading the file for me even on my browser not sure why

RE: Estuary MOD V2 Matrix/Nexus KN Edition - _BJ1 - 2023-01-17

Try the webdav method:
  • open file manager in Kodi
  • add source
  • search
  • add network: protocol WebDav-Server (HTTPS) or Webserver (HTTPS), address repo.kodinerds.net, remote path: webdav
  • name of webdav source could be anything

Then:
  • Install from Zip
  • navigate to your webdav source
  • install

Some screenshots are availabe here (sorry, german): https://www.kodinerds.net/index.php/Thread/70582-Kodinerds-Repository-im-Datei-Manager-einbinden/?postID=606076#post606076

RE: Estuary MOD V2 Matrix/Nexus KN Edition - Ninodemon - 2023-01-17

Yes thank you so much, your instructions were clear enough and I was able to finally download.

RE: Estuary MOD V2 Matrix/Nexus KN Edition - _BJ1 - 2023-01-19

3.4.2+matrix.18 / 4.0.2+nexus.18
 
  • hungarian language updated
  • flixview improvements (background for sets, movie sets poster)
  • run condition of pvr artwork module for pvr nextup fixed


RE: Estuary MOD V2 Matrix/Nexus KN Edition - Nexusof9 - 2023-01-21

Hello, first of all I want to thank you very much for the Estuaire ModV2 skin.
However, since about 3 months, I have a problem in the TV Series category only in the TV category Widget.
I have the name of the TV series that appear twice.
I registered to report the problem, because despite the updates of the skin the problem persists.
I redid a new installation with Kodi 20 Nexus, and the problem is still there.
I am sorry for my English language, because I am French.
Thanks a lot for your help.

Image

RE: Estuary MOD V2 Matrix/Nexus KN Edition - Nexusof9 - 2023-01-21

Yes I forgot, I have another problem with Kodi 20 Nexus
I also have a problem with the user interface adjusting the overscan when I use the Skin.
When I put the original skin back on, the user interface that adjusts overscan works.

Thanks for your answer.

RE: Estuary MOD V2 Matrix/Nexus KN Edition - _BJ1 - 2023-01-21

You don't need to adjust the overscan on modern TVs except you have an old Tube-TV. Nearly every TV with HDMI input is able to fit the whole screen within. It's just depends from screen format setting of the tv. Don't use 16:9, wide or similar on your TV, use "just scan", "compute" or else depending on your TV.

RE: Estuary MOD V2 Matrix/Nexus KN Edition - jjd-uk - 2023-01-21

Note if this is the Video Calibration window then there's a necessary change for v20, see https://forum.kodi.tv/showthread.php?tid=363553&pid=3133572#pid3133572

Unfortunately it seems this wasn't communicated at the time the code change was made.

RE: Estuary MOD V2 Matrix/Nexus KN Edition - Nexusof9 - 2023-01-21

I have a recent Samsung 4K HDR+ TV, yet I needed to set the Kodi interface after a new installation, sometimes I also need to set the first time for each frequency in playback, 23,98, 25, 50 fps ect.......

But it's not too bad because I solved my problem by putting back the default skin just for settings, then I switch to Estuary Mod V2 and everything is fine.

Thank you.

RE: Estuary MOD V2 Matrix/Nexus KN Edition - _BJ1 - 2023-01-21

Thanks for the hint.

RE: Estuary MOD V2 Matrix/Nexus KN Edition - _BJ1 - 2023-01-21

(2023-01-21, 15:36)Nexusof9 Wrote: I needed to set the Kodi interface after a new installation, sometimes I also need to set the first time for each frequency in playback, 23,98, 25, 50 fps ect.......
And even this is not required if You choose the right setting within your tv display options  Smile I remember this setting is named "just scan" on Samsung TVs.

RE: Estuary MOD V2 Matrix/Nexus KN Edition - Nexusof9 - 2023-01-21

I also use the setting to align the position of the subtitles, now with the new subtitle support, with the manual setting I also have to adjust the position bar to the desired height.
But it doesn't matter if with the Skin it doesn't work.
because as I report I found the solution to make the settings of my TV under the original skin.

Thanks for the information Smile

RE: Estuary MOD V2 Matrix/Nexus KN Edition - Nexusof9 - 2023-01-21

On my side, I found the solution.
I posted for just I pointed out that the skin does not support this setting as the original skin.

RE: Estuary MOD V2 Matrix/Nexus KN Edition - _BJ1 - 2023-01-21

(2023-01-21, 13:16)Nexusof9 Wrote: I have the name of the TV series that appear twice.

Has been fixed and will be available with the next update.

Thx

RE: Estuary MOD V2 Matrix/Nexus KN Edition - Nexusof9 - 2023-01-21

Thank you very much for all your work.

Again a huge thank you for your Estuary Mod V2 skin, I am a big fan and it is really fantastic.