(2015-11-08, 00:08)wints Wrote: Hi I had the same problem but was using emby for kodi addon and needed to do a fresh re-scrape of my data base don't know if it's something similar for you

(2015-11-09, 13:59)moravec Wrote: Hello, does anybody have a source for cool countdown intros?

(2015-11-07, 08:33)minscof Wrote: Cinemavision is great. I use the advanced launcher with confluence skin. My sequence is very simple : one random audio bumper, one trailer , one countdown.

These 3 steps perform well, but then cinemavion fails to launch the movie

Here is the debug log http://xbmclogs.com/ptsowtne8. I use openelec V6 on a raspberry PI model B. I had the same problem with the previous version of openelec.

Thanks for your help.

(2015-11-07, 09:38)kemuri Wrote: OK, here's my experience. On my laptop - with the setup described by Scott - everything works fine. Both trailer and audio bumper intro plays as it has to. Now rPi model B 512: same setup, CV folder path on SD card = only trailer, no audio bumper intro. Tried to change CV content path to smb location = same. No intro, only trailer. I have the files copied to correct folders, as i mentioned with my laptop works great. Any suggestions? Thank you!

Edit: It works now normally after i did a reboot on my Pi. Dont know what the trouble was.

(2015-11-07, 13:30)sl4ppy Wrote: I installed and did the initial setup of directories, etc, but get the following error when I try to launch. I have uninstalled and re-installed CinemaVision several times. :/

Code:

05:28:14 T:10932  NOTICE: [- CinemaVision -] (API): Rating Systems:
05:28:14 T:10932  NOTICE: [- CinemaVision -] (API):   MPAA: [NR, G, PG, PG-13, R, NC-17]
05:28:14 T:10932  NOTICE: [- CinemaVision -] (API):   FSK: [18, 16, 12, 6, 0]
05:28:14 T:10932  NOTICE: [- CinemaVision -] (API):   DEJUS: [18 Anos, 16 Anos, 14 Anos, 12 Anos, 10 Anos, Livre]
05:28:14 T:10932  NOTICE: [- CinemaVision -] (API):   BBFC: [R18, 18, 15, 12, 12A, PG, U, Uc]
05:28:14 T:10932  NOTICE: [- CinemaVision -]: FIRST RUN
05:28:14 T:10932   ERROR: EXCEPTION Thrown (PythonToCppException) : -->Python callback/script returned the following error<--
                                             - NOTE: IGNORING THIS CAN LEAD TO MEMORY LEAKS!
                                            Error Type: <class 'xml.etree.ElementTree.ParseError'>
                                            Error Contents: no element found: line 1, column 0
                                            Traceback (most recent call last):
                                              File "C:\Users\<snip>\AppData\Roaming\Kodi\addons\script.cinemavision\addon.py", line 18, in <module>
                                                player.begin()
                                              File "C:\Users\<snip>\AppData\Roaming\Kodi\addons\script.cinemavision\lib\player.py", line 67, in begin
                                                e.start(seqPath)
                                              File "C:\Users\<snip>\AppData\Roaming\Kodi\addons\script.cinemavision\lib\experience.py", line 886, in start
                                                return self._start(sequence_path)
                                              File "C:\Users\<snip>\AppData\Roaming\Kodi\addons\script.cinemavision\lib\experience.py", line 896, in _start
                                                self.processor = cinemavision.sequenceprocessor.SequenceProcessor(sequence_path, content_path=cvutil.getContentPath())
                                              File "C:\Users\<snip>\AppData\Roaming\Kodi\addons\script.cinemavision\lib\cinemavision\sequenceprocessor.py", line 1156, in __init__
                                                self.loadSequence(sequence_path)
                                              File "C:\Users\<snip>\AppData\Roaming\Kodi\addons\script.cinemavision\lib\cinemavision\sequenceprocessor.py", line 1250, in loadSequence
                                                self.sequence = sequence.loadSequence(sequence_path)
                                              File "C:\Users\<snip>\AppData\Roaming\Kodi\addons\script.cinemavision\lib\cinemavision\sequence.py", line 1047, in loadSequence
                                                return getItemsFromString(dstring)
                                              File "C:\Users\<snip>\AppData\Roaming\Kodi\addons\script.cinemavision\lib\cinemavision\sequence.py", line 1039, in getItemsFromString
                                                return getItemsFromXMLString(dstring)
                                              File "C:\Users\<snip>\AppData\Roaming\Kodi\addons\script.cinemavision\lib\cinemavision\sequence.py", line 1019, in getItemsFromXMLString
                                                e = ET.fromstring(dstring)
                                              File "C:\Program Files (x86)\Kodi\system\python\Lib\xml\etree\ElementTree.py", line 1301, in XML
                                                return parser.close()
                                              File "C:\Program Files (x86)\Kodi\system\python\Lib\xml\etree\ElementTree.py", line 1654, in close
                                                self._raiseerror(v)
                                              File "C:\Program Files (x86)\Kodi\system\python\Lib\xml\etree\ElementTree.py", line 1506, in _raiseerror
                                                raise err
                                            ParseError: no element found: line 1, column 0
                                            -->End of Python script error report<--

EDIT: I finally got it working. I had to create and save a new sequence with the sequence editor. The default one was invalid or something?

(2015-11-08, 00:00)NewMedia Wrote: This is a great add on! I have not been able to touch my theater system and Kodi in a while (work) but good to see all these new developments happening. The custom modules are good and have been designed well. The skin I use has integrated CV so I have just set everything up and it works perfectly, except that the movie does not play after the sequence is finished, just returns back to the normal screen. I feel like I am missing the blatantly obvious here but not sure what exactly it is, but does anyone have an idea as to why it does not play automatically after the sequence is finished?

(2015-11-08, 02:13)leejk Wrote: Hi, is there a setting in that skin to enable the pop up suppression? I still see the brief pop up in between loading movie trailers, and also the occasional culyrics pop up.

Thx

(2015-11-08, 03:25)dchabby Wrote: I may have missed something simple but I installed the addon and it worked fine in demo mode but once I added the content path in nothing works other than playing 2 trailers.

Any help would be greatly appreciated.

(2015-11-08, 04:54)HomeTheatreGuru Wrote:

(2015-11-06, 17:53)CinemaVision-Scott Wrote:

(2015-11-05, 14:57)HomeTheatreGuru Wrote: Audio bumpers still not working for me : (

Literally everything else is! I have re-downloaded the audio files from your website, Scott. Log says "file unplayable" as per previous post. No idea why this is. When I manually select the file it plays flawlessly.

Can I talk you into posting a log after reproducing the issue with Audio Format Bumpers?

You can find my log here: http://www.xbmclogs.com/p5h4drjc5

I think it is some sort of caching problem. If you have a look at the log you will find this line:

Quote:ERROR: Playlist Player: skipping unplayable item: 1, path [smb://NASDDB2A8/Multimedia/XBMC/Media/Cinema Vision/Audio Format Bumpers/DTS-HD Master Audio/DTS - SFX.m2ts]

Thing is, I don't even have this file in my setup anymore! I have downloaded the mp4 version of the same file off your website and replaced it in the DTS HD folder. But CV still assumes the old (corrupted) file needs to be played back. How do I get around this? Update Content Path in CV settings does not make a difference.

I had also tried to uninstall the add-on entirely. But to my surprise, when I downloaded the app again to set things up from scratch my old options were still there! I think I need to flush my cache somehow. I am on Openelec.

(2015-11-08, 08:52)aptalca Wrote: Hi Scott,

I can't get the slides.xml files to work. I have quite a few slides packs that I acquired over the years and they all use different naming schemes. I had slides.xml's that fit each in their respective folders and they worked in cinema experience.

But cinema vision does not seem to accept anything I tried and treats all question and answer slides as individual slides.

For instance I have a pack with naming scheme CokeCount1a.jpg for questions and CokeCount1b.jpg as the answer. My xml has the following:

Code:

<slides>
    <slide>
        <question format="CokeCount([0-9]{1,3})a\.jpg" />
        <clue format="CokeCount([0-9]{1,3})c\.jpg" />
        <answer format="CokeCount([0-9]{1,3})b\.jpg" />
    </slide>
</slides>

What is a correct format for the xml?

Thanks

(2015-11-08, 13:08)NewMedia Wrote:

(2015-11-08, 00:08)wints Wrote: Hi I had the same problem but was using emby for kodi addon and needed to do a fresh re-scrape of my data base don't know if it's something similar for you

Thanks for the suggestion, unfortunately it did not work for me. I will have a closer look to see what I am missing later.

(2015-11-08, 19:47)mysteron09 Wrote: Pro tip - I've found that video bumpers set to an arbitrary directory to play say a cartoon or short are a bit wonky. This isn't a problem (at least for people running Macs or Linux) - merely create a file alias and move the alias(es) into the CinemaVision video bumpers directory for short films.

(2015-11-09, 13:59)moravec Wrote: Hello, does anybody have a source for cool countdown intros?

(2015-11-09, 16:54)mstang1988 Wrote: My main feature fails to play. I'm using "ace" skin modified to work with cinema vision instead of Cinema Exerperience. I click "info" then "cinema ex" (with the path to the Cinema Vision script).

http://pastebin.com/nf1XSfck

Audio trailers work fine as do previews. I did remove old parts of the log as it had login credentials that I didn't want on pastebin. What's posted should be sufficient.

Quote:Cinemavision is great. I use the advanced launcher with confluence skin. My sequence is very simple : one random audio bumper, one trailer , one countdown.

These 3 steps perform well, but then cinemavion fails to launch the movie

Here is the debug log http://xbmclogs.com/ptsowtne8. I use openelec V6 on a raspberry PI model B. I had the same problem with the previous version of openelec.

Thanks for your help.

Quote:Hey there! XBMCLogs doesn't seem to think your log exists. Can you post it up again for us?

(2015-11-08, 00:00)NewMedia Wrote: This is a great add on! I have not been able to touch my theater system and Kodi in a while (work) but good to see all these new developments happening. The custom modules are good and have been designed well. The skin I use has integrated CV so I have just set everything up and it works perfectly, except that the movie does not play after the sequence is finished, just returns back to the normal screen. I feel like I am missing the blatantly obvious here but not sure what exactly it is, but does anyone have an idea as to why it does not play automatically after the sequence is finished?

(2015-11-09, 20:29)minscof Wrote: Here is the debug log http://xbmclogs.com/phmzzzbps . I hope it will be ok this time.

(2015-11-09, 22:02)NewMedia Wrote: I have posted the log > http://pastebin.com/6UfSBqJQ

(2015-11-09, 22:53)CinemaVision-Scott Wrote:

(2015-11-09, 20:29)minscof Wrote: Here is the debug log http://xbmclogs.com/phmzzzbps . I hope it will be ok this time.

That worked, thanks! So it doesn't look like CinemaVision sees the feature you're trying to play. Is this for a movie scraped locally into your Kodi library, or something from a streaming source? Here's what I see in the log:

Code:

FEATURE [ 'Feature Stub' ]:
   Path: u'/storage/.kodi/addons/script.cinemavision/resources/videos/script.cinemavision.feature_stub.mp4'
   Rating: (MPAA:PG-13)
   Genres:
   3D: No
   Audio: Dolby Digital

CinemaVision will only play the Feature Stub when there is no feature passed into the add-on. We currently don't have a way to support streaming content, because we rely too heavily on the information from the Kodi database to put together the sequence. If this is for a movie that's scraped locally into your Kodi database, try playing it normally via Kodi, then try playing it with CinemaVision then posting a debug log. I'd be curious what's failing here, because the add-on seems to be functioning normally.

(2015-11-09, 22:02)NewMedia Wrote: I have posted the log > http://pastebin.com/6UfSBqJQ

Thanks for that! Was the feature you were trying to watch American Sniper? In looking through your sequence, I don't see a Feature module. Do you have one in your sequence? If not, add that and you should be good. If so - that's not supposed to happen.

(2015-11-09, 23:49)NewMedia Wrote: Yes, it worked! I knew it was something obvious (clearly not to me). I misunderstood the purpose of the feature module.Thanks for your help!

(2015-11-09, 22:53)CinemaVision-Scott Wrote:

(2015-11-09, 20:29)minscof Wrote: Here is the debug log http://xbmclogs.com/phmzzzbps . I hope it will be ok this time.

That worked, thanks! So it doesn't look like CinemaVision sees the feature you're trying to play. Is this for a movie scraped locally into your Kodi library, or something from a streaming source? Here's what I see in the log:

Code:

FEATURE [ 'Feature Stub' ]:
   Path: u'/storage/.kodi/addons/script.cinemavision/resources/videos/script.cinemavision.feature_stub.mp4'
   Rating: (MPAA:PG-13)
   Genres:
   3D: No
   Audio: Dolby Digital

CinemaVision will only play the Feature Stub when there is no feature passed into the add-on. We currently don't have a way to support streaming content, because we rely too heavily on the information from the Kodi database to put together the sequence. If this is for a movie that's scraped locally into your Kodi database, try playing it normally via Kodi, then try playing it with CinemaVision then posting a debug log. I'd be curious what's failing here, because the add-on seems to be functioning normally.

(2015-11-10, 00:27)minscof Wrote: Ok , it was a local movie not a streaming content, but I forgot to add a feature in my sequence. I believed, it was not necessary if you want to play the movie at the end of the sequence.

I added a feature and now everything is ok.
Thank you for your help, and for your very good addon.

(2015-11-10, 08:09)thekow Wrote: Quick Question. With Aeon mq6 released they "support" cinema vision in the skin. Although when you click the movie and choose cinema vision, the output of cinema vision says there is no features to play. So do i need to modify the skin or plugin to get this to work.