(2019-03-19, 07:03)situ Wrote: Hello Everyone,

I just Picked up an Asus Chromebox CN60. (This is the Second one I have the first one is running with Libraelec and Kodi)
I did try instructions given in the Wiki to remove the Write protection Screw and when I try to get the device to developer mode nothing happens. It just stays with a black screen.

The process I am following is

1. Insert the paperclip in the reset hole
2. Power on the Chromebox while holding the paperclip
3. Remove the paperclip and wait

Nothing comes up on the screen. It's just a blank screen. I have tried the same multiple time.
If I don't press the reset hole and boot the device it is login into the Chrome os and Asking to set it up.

I am intending to install a 256GB SSD and Windows 10 on it which can then run Kodi.
Please do let me know what am I doing wrong.

(2019-03-23, 20:32)mxlance Wrote: @matt Devo
I am experiencing crazy slow SMB network speed.
I am trying to copy a addon settings folder to the userdata>addon folder on my chromebox.
700mb folder and i am going on 7 hours now.
it is copying ever so slowly.
LibreELEC 9.0.1
i did add the 'pci=nomsi' to /flash/EFI/BOOT/grub.cfg

any thoughts, do you need a log?

thank you

(2019-03-25, 03:21)Newbie_from_NJ Wrote: I've had this box for a few years now and have never updated its firmware (SeaBIOS ver rel-1.8.2-11-gdb21545-20150618-MattDevo)
Could this be the issue?

(2019-03-26, 07:45)ardsavac Wrote: Matt,
I have a blank screen when I turn the computer on.
I decided it was time to update the firmware and install the latest libreelec.

Asus CN60 standalone

I booted gallium live and ran the update script. The script reported success with the firmware update. Upon rebooting to install libreelec I was greeted with a blank screen. I have tried booting with libreelec install usb and without it. I have tried with and without a keyboard, and tried a computer monitor via HDMI instead of the TV it is connected to.

I will try another monitor when I'm able.

Is this likely to be a display resolution problem?
Is there a procedure of key presses to install libreelec from a blank boot? You alluded to doing this earlier in this thread.

(2019-03-25, 04:34)Matt Devo Wrote:

(2019-03-25, 03:21)Newbie_from_NJ Wrote: I've had this box for a few years now and have never updated its firmware (SeaBIOS ver rel-1.8.2-11-gdb21545-20150618-MattDevo)
Could this be the issue?

 I mean, that firmware is 4 years old now, so I'd certainly recommend updating to the latest UEFI firmware, then doing a fresh install of LE 9.0.1. Then apply the fix from the wiki, which while mainly to fix Ethernet performance issues, could potentially help Wifi as well. The USB issue I have no idea, I've not seen or heard anyone having any similar problems, but I'd say update the firmware and then re-evaluate 

(2019-03-27, 19:04)Newbie_from_NJ Wrote: Hi Matt, 

Just to be sure I don't screw things updating my firmware, should be as simple as, correct?
1. Boot off an Ubuntu Live USB and connect to internet
2. Open a command shell
3. run this command: 

Code:

cd; curl -L -O http://mrchromebox.tech/setup-kodi.sh && sudo bash setup-kodi.sh

4. Choose: coreboot firmware install/update 

(2019-03-27, 19:48)Matt Devo Wrote:

(2019-03-27, 19:04)Newbie_from_NJ Wrote: Hi Matt, 

Just to be sure I don't screw things updating my firmware, should be as simple as, correct?
1. Boot off an Ubuntu Live USB and connect to internet
2. Open a command shell
3. run this command: 

Code:

cd; curl -L -O http://mrchromebox.tech/setup-kodi.sh && sudo bash setup-kodi.sh

4. Choose: coreboot firmware install/update 

 correct. Ubuntu doesn't include curl by default, so may likely need to 'sudo apt install curl' before running the script command 

(2019-03-27, 19:48)Matt Devo Wrote:

(2019-03-27, 19:04)Newbie_from_NJ Wrote: Hi Matt, 

Just to be sure I don't screw things updating my firmware, should be as simple as, correct?
1. Boot off an Ubuntu Live USB and connect to internet
2. Open a command shell
3. run this command: 

Code:

cd; curl -L -O http://mrchromebox.tech/setup-kodi.sh && sudo bash setup-kodi.sh

4. Choose: coreboot firmware install/update 

 correct. Ubuntu doesn't include curl by default, so may likely need to 'sudo apt install curl' before running the script command 

(2019-04-13, 01:21)Newbie_from_NJ Wrote: Hi Matt,

I updated to the latest firmware... all went smooth. The wireless keyboard issue is now gone. The only thing still pending is that I have no internet when waking up the chromebox. So I'm going to proceed with the ethernet tweak from your wiki. Except the instructions call to add "pcie_aspm.policy=performance" after "quiet"  (without the quotes). Please see what I get: https://www.dropbox.com/s/7whpy5min6j7vro/Photo%20Apr%2012%2C%207%2007%2023%20PM.jpg?dl=0

Am I to add that code after "qui$" instead? Would like to confirm this before I proceed. Thanks!