Testbuild rev #12306 - Printable Version +- Kodi Community Forum (https://forum.kodi.tv) +-- Forum: Support (https://forum.kodi.tv/forumdisplay.php?fid=33) +--- Forum: General Support (https://forum.kodi.tv/forumdisplay.php?fid=111) +---- Forum: Windows (https://forum.kodi.tv/forumdisplay.php?fid=59) +---- Thread: Testbuild rev #12306 (/showthread.php?tid=32202) |
Testbuild rev #12306 - WiSo - 2008-03-26 Here's a new test build compiled from #12306. With the hint of elupus I tried to activate audio pass through. It fails on my PC to create the soundbuffer but this could be due to missing hardware... http://sourceforge.net/project/showfiles.php?group_id=87054&package_id=260464&release_id=585323 So please try and report if audio pass through: 1) is working! 2) it's the same like with the older builds 3) it's even worse than before in case of 2) and 3) pastebin a full log while playing videos with pass through enabled. - jz53 - 2008-03-26 thanks for the new build. but it does not work with ac3 passthrough: 15:49:53 T:3404 M:2147483647 DEBUG: CGUIInfoManager::SetCurrentSong(F:\movie\PRE0NNW1\pre0nw1-0ms.ac3) 15:49:53 T:200 M:2147483647 DEBUG: Load DialogProgress.xml: 21.09ms (1.09 ms xml load) 15:49:53 T:3176 M:2147483647 DEBUG: CDVDAudioCodecPassthrough: Synced to AC3 frame 15:49:53 T:3176 M:2147483647 NOTICE: Creating audio device with codec id: 86020, channels: 2, sample rate: 48000, pass-through 15:49:53 T:3176 M:2147483647 ERROR: CWin32DirectSound::CWin32DirectSound - CreateSoundBuffer failed with error code -2005401570 15:49:53 T:3176 M:2147483647 ERROR: CThread:taticThread : Access violation at 0x00418fbd: Reading location 0x00000000 15:49:53 T:3176 M:2147483647 NOTICE: Closing audio device 15:49:53 T:3176 M:2147483647 ERROR: CThread:taticThread : Access violation at 0x00418eb2: Reading location 0x00000000 15:49:53 T:3176 M:2147483647 DEBUG: CThread:taticThread, deleting thread graphic context 15:49:53 T:3176 M:2147483647 DEBUG: Thread 3176 terminating 15:49:53 T:3404 M:2147483647 DEBUG: Loading additional tag info for file F:\movie\PRE0NNW1\pre0nw1-0ms.ac3 15:49:53 T:3404 M:2147483647 DEBUG: Alloc resources: 4.88ms (0.00 ms skin load, 0.27 ms preload) 15:49:56 T:3812 M:2147483647 DEBUG: Alloc resources: 22.37ms (0.00 ms skin load, 0.20 ms preload) 15:50:01 T:3404 M:2147483647 NOTICE: Storing total System Uptime 15:50:01 T:3404 M:2147483647 NOTICE: Saving settings - Hitcher - 2008-03-26 It doesn't have any sound but I wouldn't say it's worse than before because the video does run at the right speed this time but then freezes after about 5 seconds. I think it's a step in the right direction. http://pastebin.com/m1fd97c4f - WiSo - 2008-03-26 Shows more or less the same error than on my platform without any digital hw. Maybe something with the initialization params... - Simlaf - 2008-03-26 This release fixed some of my issue with analog audio DTS is now working when set to analog! Thanks - kouros - 2008-03-27 playes files properly in analog output now, but digital output it hangs after 5-7 sec and it runs at normal speed now instead of the 2x before. 00:28:59 T:3704 M:2423484416 NOTICE: Creating audio device with codec id: 86020, channels: 2, sample rate: 48000, pass-through 00:28:59 T:3704 M:2423328768 ERROR: CWin32DirectSound::CWin32DirectSound - CreateSoundBuffer failed with error code -2147467263 00:28:59 T:3704 M:2423226368 ERROR: CThread:taticThread : Access violation at 0x00418fbd: Reading location 0x00000000 00:28:59 T:3704 M:2423128064 NOTICE: Closing audio device - kricker - 2008-03-27 Should all the media scrapers work with these windows builds? I am having a heck of a time getting my TV shows to scrape properly. I am getting all the info except for the episodes. It always shows 0 episodes. - anyo - 2008-03-27 Looks like I have the same problem as a lot here. It plays for about 5 seconds then freezes, no sound even for that short bit. here is the whole log http://pastebin.com/f2483e6cc I'm guessing this is the part that matters 02:23:43 T:1052 M:1312399360 DEBUG: CDVDAudioCodecPassthrough: Synced to AC3 frame 02:23:43 T:1052 M:1312399360 NOTICE: Creating audio device with codec id: 86020, channels: 2, sample rate: 48000, pass-through 02:23:43 T:1052 M:1312391168 ERROR: CWin32DirectSound::CWin32DirectSound - CreateSoundBuffer failed with error code -2147467263 02:23:43 T:1052 M:1312382976 ERROR: CThread:taticThread : Access violation at 0x00418fbd: Reading location 0x00000000 02:23:43 T:1052 M:1312382976 NOTICE: Closing audio device 02:23:43 T:1052 M:1312382976 ERROR: CThread:taticThread : Access violation at 0x00418eb2: Reading location 0x00000000 02:23:43 T:1052 M:1312382976 DEBUG: CThread:taticThread, deleting thread graphic context 02:23:43 T:1052 M:1312382976 DEBUG: Thread 1052 terminating - nmirza - 2008-03-27 analogue audio problems fixed, i.e. i dont get noice on ac3 or dd outputting to my 2.1 computer speaker system. BUT my video black screen problem still remains alas - WiSo - 2008-03-27 Curious that some getting the return code DSERR_INVALIDCALL like me the others DSERR_UNSUPPORTED assuming you all have a sound card with digital output. Have to see if I can get such a card somewhere. - BAG_Ass - 2008-03-27 Guys skip and replay functions in music is not working yet and pause too. |