Android KODI 21 Omega Beta 3: No Dolby Plus / TrueHD Passthrough at NVIDIA Shield - Printable Version +- Kodi Community Forum (https://forum.kodi.tv) +-- Forum: Support (https://forum.kodi.tv/forumdisplay.php?fid=33) +--- Forum: General Support (https://forum.kodi.tv/forumdisplay.php?fid=111) +---- Forum: Android (https://forum.kodi.tv/forumdisplay.php?fid=164) +---- Thread: Android KODI 21 Omega Beta 3: No Dolby Plus / TrueHD Passthrough at NVIDIA Shield (/showthread.php?tid=376469)

KODI 21 Omega Beta 3: No Dolby Plus / TrueHD Passthrough at NVIDIA Shield - pipsen - 2024-02-28 Hi, I have the following setup: KODI 21 Omega Beta 3 (64 bit) on Nvidia Shield HDMI 2.1 cable from the Shield to a DENON AVR HDMI 2.1 cable from the AVR to the television Audio passthrough is enabled, and the capability for DTS, DTS-HD, E-AC3, TrueHD is correctly recognized and activated. DTS and DTS-HD passthrough work wonderfully, but E-AC3 and TrueHD result in a stereo fallback (L/R). Nvidia Shield Settings: Dolby audio processing: Off Formats: Automatic Stereo up mix: Off I'm also pretty sure that it used to work with Nexus 10.3 (Maven Build) with the same hardware setup and setings. But now with Omega Beta 3, it doesn't work anymore, and unfortunately, not with Nexus 10.3 (Maven Build) either. However, I'm not aware of having changed anything. Debug Log RE: KODI 21 Omega Beta 3: No Dolby Plus / TrueHD Passthrough at NVIDIA Shield - fritsch - 2024-02-29 Please play it from nfs,smb or local source I see network issues directly after opening the file. Sadly I have no idea what "joyn" is ... but as you say .. it worked before with the very same version ... RE: KODI 21 Omega Beta 3: No Dolby Plus / TrueHD Passthrough at NVIDIA Shield - pipsen - 2024-02-29 A few facts: the playback is performed via a SMB file share Joyn is a plugin from a german TV broadcast (online VOD portal) I tested both, brandnew installations without any plugins with latest nighly Nexus (Maven Build) latest nightly Omega => Same situation, no AC3, no E-AC3 and no TrueHD is not working Here is another Debug Log with my Plugins disabled and a small 6GB Demo file directly started from local internal storage: Debug Log RE: KODI 21 Omega Beta 3: No Dolby Plus / TrueHD Passthrough at NVIDIA Shield - pipsen - 2024-02-29 Last but not least a debug log of a brand new Nexus Installation (Maven Build) with just the Audio settings set, nothing else: Debug Log (Nexus) RE: KODI 21 Omega Beta 3: No Dolby Plus / TrueHD Passthrough at NVIDIA Shield - pipsen - 2024-02-29 Found the Reason... DENON Receiver had a wrong Setting on this input 🤦🏻‍♂️🤦🏻‍♂️🤦🏻‍♂️🤦🏻‍♂️🤦🏻‍♂️ #sorry RE: KODI 21 Omega Beta 3: No Dolby Plus / TrueHD Passthrough at NVIDIA Shield - fritsch - 2024-02-29 Thanks! RE: KODI 21 Omega Beta 3: No Dolby Plus / TrueHD Passthrough at NVIDIA Shield - dany78vrc - 2024-10-25 Same problem for me…how you solve this? 🙏 RE: KODI 21 Omega Beta 3: No Dolby Plus / TrueHD Passthrough at NVIDIA Shield - pipsen - 2024-10-25 When you have the correct input enabled at your DENON, and KODI in IDLE mode, you need to change to „DTS Neural:X“ at DENON RE: KODI 21 Omega Beta 3: No Dolby Plus / TrueHD Passthrough at NVIDIA Shield - pipsen - 2024-10-25 RE: KODI 21 Omega Beta 3: No Dolby Plus / TrueHD Passthrough at NVIDIA Shield - dany78vrc - 2024-10-25 Thx, I solve with enable expert option at the bottom left of the screen in  menu settings, by default dts hd and Dtrue hd was switched off 🫣