Posts: 9
Joined: May 2009
Reputation:
0
Couldnt get it to work on Mac. Maybe different remote mappings.
What happens:
Press Play/Pause button on Mac remote.
No seek bar appears, but can navigate left and right.
Click Play again and menu window open.
Try, for example, to change Ratio and nothing happens.
HTH
Posts: 1,020
Joined: Jan 2007
Reputation:
33
2009-05-27, 21:41
(This post was last modified: 2009-05-27, 21:44 by MacGyver.)
Should work fine, I have the newest xTV, and the most current build of XBMC. The screen shot is from the Windows PC version, but it works the same on Xbox. A current build is very important, jmarshall implemented it just a little bit ago, I'm not sure what it would work like on a earlier build. My xTV has timestamps of 1/1/2009, and my XBMC was created on 5/5/2009. If you have all those, and still have problems, let me know, I'll see what I can do.
I access them by opening up the OSD menu, and then selecting either "Audio" or "Video" from there. On the PC I use the "M" key, then right arrow over to either of those settings, and "Enter".
Posts: 9
Joined: May 2009
Reputation:
0
Ive got XBMC 9.04 r19953 5/5/2009.
xTV is the same.
Maybe its the remote key mappings?
Posts: 26,215
Joined: Oct 2003
Reputation:
187
2009-05-28, 07:28
(This post was last modified: 2009-05-28, 07:33 by jmarshall.)
Not new enough. It was finalized in r20088 (i.e. after 9.04).
Posts: 9
Joined: May 2009
Reputation:
0
Ah, I see. Thanks for the reply. Will update and retest.
Posts: 1,020
Joined: Jan 2007
Reputation:
33
2009-05-30, 11:12
jmarshall, is there a way to let up/down move through the remaining sliders in settings. ie, you have audio offset on the screen, and pressing down will switch it to subtitle offset. The same for video sliders.
