[melons2]

I have searched the thread and I have tried for days to get this to work....but can't figure it out.

I have an IPTV account.
I have an M3U URL and EPG URL.
I have an IPTV Addon.

There doesn't appear to be an .ini file to use?

Would some give me short directions to take what I have and get it into the right places in settings so this will work?

Thank you

[Cangeoboy]

How do i set this up?
I keep getting "oops, sorry about that". It was not possible to load program data, because the settings are invalid.
I used zip repository.primaeval-0.0.2
I load version 0.17.445

I don't know what i need to put on the settings considering there is no provision for username or password.
This is on Kodi 17.6 both on Windows and Android.

I sometimes get this error if I have a channel selected with foreign characters in its epg.  See my post above.  If you are able to remove that channel from your xmltv file then it may solve this problem.

[JQZ*]

How do i set this up?
I keep getting "oops, sorry about that". It was not possible to load program data, because the settings are invalid.
I used zip repository.primaeval-0.0.2
I load version 0.17.445

I don't know what i need to put on the settings considering there is no provision for username or password.
This is on Kodi 17.6 both on Windows and Android.

 

I have searched the thread and I have tried for days to get this to work....but can't figure it out.

I have an IPTV account.
I have an M3U URL and EPG URL.
I have an IPTV Addon.

There doesn't appear to be an .ini file to use?

Would some give me short directions to take what I have and get it into the right places in settings so this will work?

Thank you

The first thing needed to get TVGF working is to set a URL or local path to your XMLTV EPG file:

Code:

Settings > Source > XMLTV Source

If you have an m3u file with your channel mappings, you can set a URL or local path to it:

Code:

Settings > Optional > Import m3u
Settings > Optional > m3u source

That ought to get you folks started.

[samueljones]

Hi, any skinner in the house to help me out plaese, I will like to move the part circle in red in the image to the right a little bit to create some room at the left side. please where do i edit in TVG skin to achieve this .

Thanks in advance.

[daemonrealm]

Hello everyone.

Issue: when I am trying to add folders in stream setup. I see the following folders when browsing for the "channel" folder - however when I select the directory shown with the [/B] is does not "go into" or list the contents of the folder. When I attempt to add the channels TVGF does not recognize the channel listing in the add-on I select:

[M89SE]

Hi, any skinner in the house to help me out plaese, I will like to move the part circle in red in the image to the right a little bit to create some room at the left side. please where do i edit in TVG skin to achieve this .

Thanks in advance.

Hi, I'm not using FTVG but it should look the same as in my addon so EPG is in id 5001 in file script-tvguide-main.xml.


Ex. you have to edit <control type="button" id="5001"> (posy, posx, width, height)

xml:
<control type="group">

            <description>TV Guide group</description>

            <posx>0</posx>

            <posy>0</posy>

            <width>1920</width>

            <height>1080</height>

            <visible>!Control.IsVisible(5000)</visible>

            

        <control type="button" id="5001">

            <description>marker for EPG data view - should be Hidden!</description>

            <top>239</top>

            <left>350</left>

            <width>1560</width>

            <height>562</height>

            <visible>hidden</visible>

        </control>

[M89SE]

I'm a bit stuck and I thought maybe you guys can help me out, I'm trying to force colorDiffuse to read a variable $VAR[] instead of a hex code is this possible? I also tryied using xbmc.getInfoLabel('$VAR[SkinColorVar]') but that only gave me "button_focus" not the hex color maybe there is a way to get it?.

My solution below won't work.

python:
#Redraw timebar

tmp_control = self.getControl(self.C_MAIN_TIMEBAR)

if self.timebar:

self.removeControl(self.timebar)

self.timebar = xbmcgui.ControlImage(tmp_control.getX(), tmp_control.getY(), tmp_control.getWidth(), tmp_control.getHeight(), os.path.join(Skin.getSkinPath(), 'media', 'tvguide-timebar.png'), colorDiffuse="$VAR[SkinColorVar]")

self.addControl(self.timebar)

self.updateTimebar()

Problem solved. Had to extract the colors from "special/skins/colors/" files.

[samueljones]

Hi, any skinner in the house to help me out plaese, I will like to move the part circle in red in the image to the right a little bit to create some room at the left side. please where do i edit in TVG skin to achieve this .

Thanks in advance.

Hi, I'm not using FTVG but it should look the same as in my addon so EPG is in id 5001 in file script-tvguide-main.xml.


Ex. you have to edit <control type="button" id="5001"> (posy, posx, width, height)

xml:
<control type="group">

            <description>TV Guide group</description>

            <posx>0</posx>

            <posy>0</posy>

            <width>1920</width>

            <height>1080</height>

            <visible>!Control.IsVisible(5000)</visible>

            

        <control type="button" id="5001">

            <description>marker for EPG data view - should be Hidden!</description>

            <top>239</top>

            <left>350</left>

            <width>1560</width>

            <height>562</height>

            <visible>hidden</visible>

        </control>

 

Thanks a lot that helps

[tecnoglasius]

Hello
I do an installation from 0 in kodi and I still have the same error, someone could help me I'm using a private iptv list of iks

[tecnoglasius]

Hello
I do an installation from 0 in kodi and I still have the same error, someone could help me I'm using a private iptv list of iks

its not possible to load program data

[daemonrealm]

hello,

I am getting this error when loading/downloading my EPG data. this EPG works usually. Maybe the data on the new download is somehow corrupted? I have reset all DB data. restarted Kodi.

2019-06-22 20:51:46.194 T:123145367056384   ERROR: GetDirectory - Error getting /Users/j131337/Library/Application Support/Kodi/userdata/addon_data/script.tvguide.fullscreen/logos
2019-06-22 20:51:46.194 T:123145367056384   ERROR: GetDirectory - Error getting special://profile/addon_data/script.tvguide.fullscreen/logos
2019-06-22 20:51:54.420 T:123145367056384   ERROR: EXCEPTION: Non-Existent Control 4323
2019-06-22 20:51:54.420 T:123145367056384   ERROR: EXCEPTION: Non-Existent Control 5555
2019-06-22 20:52:55.402 T:123145384755200   ERROR: Traceback (most recent call last):
2019-06-22 20:52:55.402 T:123145384755200   ERROR:   File "/Users/j131337/Library/Application Support/Kodi/addons/script.tvguide.fullscreen/source.py", line 529, in _updateChannelAndProgramListCaches
2019-06-22 20:52:55.404 T:123145384755200   ERROR:     self.conn.commit()
2019-06-22 20:52:55.405 T:123145384755200   ERROR: IntegrityError: FOREIGN KEY constraint failed

[moshoodo123]

sorted thanks

[covchump]

Hi i posted a problem i have on your github issues page. any chance you could take a look please.

[samueljones]

@M89SE , or anyone can please  help me out. am trying to get the programme duration to show something like 1hr 20min.  currently it shows in minutes e.g Length  : 100 minutes.

After google search i got the following but no working.


                       <control type="label">
                        <left>1240</left>
                        <top>200</top>
                        <width>300</width>
                        <height>60</height>
                        <align>center</align>
                       <label>Duration: $INFO[ListItem.Duration(h)]h$INFO[ListItem.Duration(mm)]m</label>
                        </control>


thanks

[M89SE]

@M89SE , or anyone can please  help me out. am trying to get the programme duration to show something like 1hr 20min.  currently it shows in minutes e.g Length  : 100 minutes.

After google search i got the following but no working.


                       <control type="label">
                        <left>1240</left>
                        <top>200</top>
                        <width>300</width>
                        <height>60</height>
                        <align>center</align>
                       <label>Duration: $INFO[ListItem.Duration(h)]h$INFO[ListItem.Duration(mm)]m</label>
                        </control>


thanks

This one is quite tricky! I created this function in my own TV Guide a while ago. 

You will need to create a function in Python first and then import the setting to skin. Listitem.Duration won't work. Do you know how to programme Python or do you need some help?.

Result bottom right: