2014-12-26, 18:05
got it working now. thanks mate.
2014-12-29, 16:12
For kodibuntu users experiencing compilation issues: for me using the --recursive flag in the git clone command solved the problem.
2014-12-30, 18:31
I use Kodibuntu with Hyperion and Adalight. However, I have the problem that the startup with rc.local not work for me. Hyperiond is running, but nothing happens. Only when I log in with root privileges and then end hyperiond, and reboot it works. Sometimes it takes several attempts here.
Any ideas how i can get this work ?
hyperion.config.json
Any ideas how i can get this work ?
hyperion.config.json
Code:
// Automatically generated configuration file for 'Hyperion daemon'
// Generated by: HyperCon (The Hyperion deamon configuration file builder
{
/// Device configuration contains the following fields:
/// * 'name' : The user friendly name of the device (only used for display purposes)
/// * 'type' : The type of the device or leds (known types for now are 'ws2801', 'ldp8806',
/// 'lpd6803', 'sedu', 'adalight', 'lightpack', 'test' and 'none')
/// * 'output' : The output specification depends on selected device. This can for example be the
/// device specifier, device serial number, or the output file name
/// * 'rate' : The baudrate of the output to the device
/// * 'colorOrder' : The order of the color bytes ('rgb', 'rbg', 'bgr', etc.).
"device" :
{
"name" : "MyPi",
"type" : "adalight",
"output" : "/dev/ttyACM0",
"rate" : 115200,
"colorOrder" : "rgb"
},
/// Color manipulation configuration used to tune the output colors to specific surroundings.
/// The configuration contains a list of color-transforms. Each transform contains the
/// following fields:
/// * 'id' : The unique identifier of the color transformation (eg 'device_1') /// * 'leds' : The indices (or index ranges) of the leds to which this color transform applies
/// (eg '0-5, 9, 11, 12-17'). The indices are zero based. /// * 'hsv' : The manipulation in the Hue-Saturation-Value color domain with the following
/// tuning parameters:
/// - 'saturationGain' The gain adjustement of the saturation
/// - 'valueGain' The gain adjustement of the value
/// * 'red'/'green'/'blue' : The manipulation in the Red-Green-Blue color domain with the
/// following tuning parameters for each channel:
/// - 'threshold' The minimum required input value for the channel to be on
/// (else zero)
/// - 'gamma' The gamma-curve correction factor
/// - 'blacklevel' The lowest possible value (when the channel is black)
/// - 'whitelevel' The highest possible value (when the channel is white)
///
/// Next to the list with color transforms there is also a smoothing option.
/// * 'smoothing' : Smoothing of the colors in the time-domain with the following tuning
/// parameters:
/// - 'type' The type of smoothing algorithm ('linear' or 'none')
/// - 'time_ms' The time constant for smoothing algorithm in milliseconds
/// - 'updateFrequency' The update frequency of the leds in Hz
"color" :
{
"transform" :
[
{
"id" : "default",
"leds" : "*",
"hsv" :
{
"saturationGain" : 1.0000,
"valueGain" : 1.0000
},
"red" :
{
"threshold" : 0.0000,
"gamma" : 1.0000,
"blacklevel" : 0.0000,
"whitelevel" : 1.0000
},
"green" :
{
"threshold" : 0.0000,
"gamma" : 1.0000,
"blacklevel" : 0.0000,
"whitelevel" : 1.0000
},
"blue" :
{
"threshold" : 0.0000,
"gamma" : 1.0000,
"blacklevel" : 0.0000,
"whitelevel" : 1.0000
}
}
],
"smoothing" :
{
"type" : "linear",
"time_ms" : 300,
"updateFrequency" : 20.0000
}
},
/// The configuration for each individual led. This contains the specification of the area
/// averaged of an input image for each led to determine its color. Each item in the list
/// contains the following fields:
/// * index: The index of the led. This determines its location in the string of leds; zero
/// being the first led.
/// * hscan: The fractional part of the image along the horizontal used for the averaging
/// (minimum and maximum inclusive)
/// * vscan: The fractional part of the image along the vertical used for the averaging
/// (minimum and maximum inclusive)
"leds" :
[
{
"index" : 0,
"hscan" : { "minimum" : 0.4688, "maximum" : 0.5000 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 1,
"hscan" : { "minimum" : 0.5000, "maximum" : 0.5313 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 2,
"hscan" : { "minimum" : 0.5313, "maximum" : 0.5625 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 3,
"hscan" : { "minimum" : 0.5625, "maximum" : 0.5938 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 4,
"hscan" : { "minimum" : 0.5938, "maximum" : 0.6250 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 5,
"hscan" : { "minimum" : 0.6250, "maximum" : 0.6563 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 6,
"hscan" : { "minimum" : 0.6563, "maximum" : 0.6875 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 7,
"hscan" : { "minimum" : 0.6875, "maximum" : 0.7188 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 8,
"hscan" : { "minimum" : 0.7188, "maximum" : 0.7500 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 9,
"hscan" : { "minimum" : 0.7500, "maximum" : 0.7813 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 10,
"hscan" : { "minimum" : 0.7813, "maximum" : 0.8125 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 11,
"hscan" : { "minimum" : 0.8125, "maximum" : 0.8438 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 12,
"hscan" : { "minimum" : 0.8438, "maximum" : 0.8750 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 13,
"hscan" : { "minimum" : 0.8750, "maximum" : 0.9063 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 14,
"hscan" : { "minimum" : 0.9063, "maximum" : 0.9375 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 15,
"hscan" : { "minimum" : 0.9375, "maximum" : 0.9688 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 16,
"hscan" : { "minimum" : 0.9688, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 17,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 18,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.9375, "maximum" : 1.0000 }
},
{
"index" : 19,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.8750, "maximum" : 0.9375 }
},
{
"index" : 20,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.8125, "maximum" : 0.8750 }
},
{
"index" : 21,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.7500, "maximum" : 0.8125 }
},
{
"index" : 22,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.6875, "maximum" : 0.7500 }
},
{
"index" : 23,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.6250, "maximum" : 0.6875 }
},
{
"index" : 24,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.5625, "maximum" : 0.6250 }
},
{
"index" : 25,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.5000, "maximum" : 0.5625 }
},
{
"index" : 26,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.4375, "maximum" : 0.5000 }
},
{
"index" : 27,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.3750, "maximum" : 0.4375 }
},
{
"index" : 28,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.3125, "maximum" : 0.3750 }
},
{
"index" : 29,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.2500, "maximum" : 0.3125 }
},
{
"index" : 30,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.1875, "maximum" : 0.2500 }
},
{
"index" : 31,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.1250, "maximum" : 0.1875 }
},
{
"index" : 32,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.0625, "maximum" : 0.1250 }
},
{
"index" : 33,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0625 }
},
{
"index" : 34,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 35,
"hscan" : { "minimum" : 0.9688, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 36,
"hscan" : { "minimum" : 0.9375, "maximum" : 0.9688 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 37,
"hscan" : { "minimum" : 0.9063, "maximum" : 0.9375 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 38,
"hscan" : { "minimum" : 0.8750, "maximum" : 0.9063 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 39,
"hscan" : { "minimum" : 0.8438, "maximum" : 0.8750 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 40,
"hscan" : { "minimum" : 0.8125, "maximum" : 0.8438 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 41,
"hscan" : { "minimum" : 0.7813, "maximum" : 0.8125 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 42,
"hscan" : { "minimum" : 0.7500, "maximum" : 0.7813 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 43,
"hscan" : { "minimum" : 0.7188, "maximum" : 0.7500 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 44,
"hscan" : { "minimum" : 0.6875, "maximum" : 0.7188 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 45,
"hscan" : { "minimum" : 0.6563, "maximum" : 0.6875 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 46,
"hscan" : { "minimum" : 0.6250, "maximum" : 0.6563 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 47,
"hscan" : { "minimum" : 0.5938, "maximum" : 0.6250 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 48,
"hscan" : { "minimum" : 0.5625, "maximum" : 0.5938 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 49,
"hscan" : { "minimum" : 0.5313, "maximum" : 0.5625 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 50,
"hscan" : { "minimum" : 0.5000, "maximum" : 0.5313 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 51,
"hscan" : { "minimum" : 0.4688, "maximum" : 0.5000 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 52,
"hscan" : { "minimum" : 0.4375, "maximum" : 0.4688 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 53,
"hscan" : { "minimum" : 0.4063, "maximum" : 0.4375 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 54,
"hscan" : { "minimum" : 0.3750, "maximum" : 0.4063 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 55,
"hscan" : { "minimum" : 0.3438, "maximum" : 0.3750 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 56,
"hscan" : { "minimum" : 0.3125, "maximum" : 0.3438 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 57,
"hscan" : { "minimum" : 0.2813, "maximum" : 0.3125 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 58,
"hscan" : { "minimum" : 0.2500, "maximum" : 0.2813 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 59,
"hscan" : { "minimum" : 0.2188, "maximum" : 0.2500 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 60,
"hscan" : { "minimum" : 0.1875, "maximum" : 0.2188 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 61,
"hscan" : { "minimum" : 0.1563, "maximum" : 0.1875 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 62,
"hscan" : { "minimum" : 0.1250, "maximum" : 0.1563 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 63,
"hscan" : { "minimum" : 0.0938, "maximum" : 0.1250 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 64,
"hscan" : { "minimum" : 0.0625, "maximum" : 0.0938 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 65,
"hscan" : { "minimum" : 0.0313, "maximum" : 0.0625 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 66,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0313 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 67,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 68,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0625 }
},
{
"index" : 69,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.0625, "maximum" : 0.1250 }
},
{
"index" : 70,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.1250, "maximum" : 0.1875 }
},
{
"index" : 71,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.1875, "maximum" : 0.2500 }
},
{
"index" : 72,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.2500, "maximum" : 0.3125 }
},
{
"index" : 73,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.3125, "maximum" : 0.3750 }
},
{
"index" : 74,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.3750, "maximum" : 0.4375 }
},
{
"index" : 75,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.4375, "maximum" : 0.5000 }
},
{
"index" : 76,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.5000, "maximum" : 0.5625 }
},
{
"index" : 77,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.5625, "maximum" : 0.6250 }
},
{
"index" : 78,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.6250, "maximum" : 0.6875 }
},
{
"index" : 79,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.6875, "maximum" : 0.7500 }
},
{
"index" : 80,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.7500, "maximum" : 0.8125 }
},
{
"index" : 81,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.8125, "maximum" : 0.8750 }
},
{
"index" : 82,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.8750, "maximum" : 0.9375 }
},
{
"index" : 83,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.9375, "maximum" : 1.0000 }
},
{
"index" : 84,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 85,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0313 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 86,
"hscan" : { "minimum" : 0.0313, "maximum" : 0.0625 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 87,
"hscan" : { "minimum" : 0.0625, "maximum" : 0.0938 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 88,
"hscan" : { "minimum" : 0.0938, "maximum" : 0.1250 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 89,
"hscan" : { "minimum" : 0.1250, "maximum" : 0.1563 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 90,
"hscan" : { "minimum" : 0.1563, "maximum" : 0.1875 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 91,
"hscan" : { "minimum" : 0.1875, "maximum" : 0.2188 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 92,
"hscan" : { "minimum" : 0.2188, "maximum" : 0.2500 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 93,
"hscan" : { "minimum" : 0.2500, "maximum" : 0.2813 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 94,
"hscan" : { "minimum" : 0.2813, "maximum" : 0.3125 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 95,
"hscan" : { "minimum" : 0.3125, "maximum" : 0.3438 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 96,
"hscan" : { "minimum" : 0.3438, "maximum" : 0.3750 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 97,
"hscan" : { "minimum" : 0.3750, "maximum" : 0.4063 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 98,
"hscan" : { "minimum" : 0.4063, "maximum" : 0.4375 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 99,
"hscan" : { "minimum" : 0.4375, "maximum" : 0.4688 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
}
],
/// The black border configuration, contains the following items:
/// * enable : true if the detector should be activated
/// * threshold : Value below which a pixel is regarded as black (value between 0.0 and 1.0)
"blackborderdetector" :
{
"enable" : true,
"threshold" : 0.01
},
/// The configuration of the effect engine, contains the following items:
/// * paths : An array with absolute location(s) of directories with effects
/// * bootsequence : The effect selected as 'boot sequence'
"effects" :
{
"paths" :
[
"/media/scripts/hyperion/effects"
]
},
// "bootsequence" :
// {
// "effect" : "snake",
// "duration_ms" : 3000
// },
/// The configuration for the frame-grabber, contains the following items:
/// * width : The width of the grabbed frames [pixels]
/// * height : The height of the grabbed frames [pixels]
/// * frequency_Hz : The frequency of the frame grab [Hz]
"framegrabber" :
{
"width" : 64,
"height" : 64,
"frequency_Hz" : 10.0
},
/// The configuration of the XBMC connection used to enable and disable the frame-grabber. Contains the following fields:
/// * xbmcAddress : The IP address of the XBMC-host
/// * xbmcTcpPort : The TCP-port of the XBMC-server
/// * grabVideo : Flag indicating that the frame-grabber is on(true) during video playback
/// * grabPictures : Flag indicating that the frame-grabber is on(true) during picture show
/// * grabAudio : Flag indicating that the frame-grabber is on(true) during audio playback
/// * grabMenu : Flag indicating that the frame-grabber is on(true) in the XBMC menu
/// * grabScreensaver : Flag indicating that the frame-grabber is on(true) when XBMC is on screensaver
/// * enable3DDetection : Flag indicating that the frame-grabber should switch to a 3D compatible modus if a 3D video is playing
// "xbmcVideoChecker" :
// {
// "xbmcAddress" : "127.0.0.1",
// "xbmcTcpPort" : 9090,
// "grabVideo" : true,
// "grabPictures" : true,
// "grabAudio" : true,
// "grabMenu" : false,
// "grabScreensaver" : true,
// "enable3DDetection" : true
// },
/// The configuration of the Json server which enables the json remote interface
/// * port : Port at which the json server is started
"jsonServer" :
{
"port" : 19444
},
/// The configuration of the Proto server which enables the protobuffer remote interface
/// * port : Port at which the protobuffer server is started
"protoServer" :
{
"port" : 19445
},
/// The configuration of the boblight server which enables the boblight remote interface
/// * port : Port at which the boblight server is started
"boblightServer" :
{
"port" : 19333
},
"endOfJson" : "endOfJson"
}
2015-01-11, 21:40
Hi, may I ask, will or is it possible to run the hyperion addon für XBMC on a android xbmc mediaplayer?
My openlec systems runs fine with the addon, but I want to change it to a android xbmc player and there the addon seems not to send the right infos to my hyperion server.
thanks
My openlec systems runs fine with the addon, but I want to change it to a android xbmc player and there the addon seems not to send the right infos to my hyperion server.
thanks
2015-01-12, 22:58
is there a way to run it on x86-x64 openelec machines yet?? or is still just raspberry pi??
2015-01-22, 19:53
(2015-01-12, 22:58)Furby8704 Wrote: is there a way to run it on x86-x64 openelec machines yet?? or is still just raspberry pi??
Also interested in whether Hyperion is available on non-Raspberry Pi OpenElec machines (x86_64)?
I have a Revo 3610 (Atom 330) that is currently using boblight with an adalight set up, but I would love to try Hyperion.
Anyway to get Hyperion on it?
Thanks
2015-01-22, 20:13
Try Kodibuntu instead of Openelec. I can't see a big difference in a normal x86 system 
2015-01-24, 23:47
Hey Guys,
I'm really struggling with this and would appreciate your help. When I run cmake I get errors ...
cmake -DENABLE_DISPMANX=OFF
-- ENABLE_DISPMANX = OFF
-- ENABLE_SPIDEV = ON
-- ENABLE_WS2812BPWM = OFF
-- ENABLE_V4L2 = ON
-- ENABLE_X11 = OFF
-- ENABLE_TINKERFORGE = ON
-- ENABLE_PROTOBUF = ON
-- ENABLE_FB = OFF
-- Found libusb-1.0:
-- - Includes: /usr/include/libusb-1.0
-- - Libraries: /usr/lib/x86_64-linux-gnu/libusb-1.0.so
CMake Error at dependencies/CMakeLists.txt:9 (add_subdirectory):
The source directory
/tmp/hyperion/dependencies/external/protobuf
does not contain a CMakeLists.txt file.
CMake Error at dependencies/CMakeLists.txt:17 (export):
export given target "protoc_compiler" which is not built by this project.
CMake Error at dependencies/CMakeLists.txt:25 (get_property):
get_property could not find TARGET protoc_compiler. Perhaps it has not yet
been created.
-- Using protobuf compiler:
-- Configuring incomplete, errors occurred!
See also "/tmp/hyperion/CMakeFiles/CMakeOutput.log".
See also "/tmp/hyperion/CMakeFiles/CMakeError.log".
I'm really struggling with this and would appreciate your help. When I run cmake I get errors ...
cmake -DENABLE_DISPMANX=OFF
-- ENABLE_DISPMANX = OFF
-- ENABLE_SPIDEV = ON
-- ENABLE_WS2812BPWM = OFF
-- ENABLE_V4L2 = ON
-- ENABLE_X11 = OFF
-- ENABLE_TINKERFORGE = ON
-- ENABLE_PROTOBUF = ON
-- ENABLE_FB = OFF
-- Found libusb-1.0:
-- - Includes: /usr/include/libusb-1.0
-- - Libraries: /usr/lib/x86_64-linux-gnu/libusb-1.0.so
CMake Error at dependencies/CMakeLists.txt:9 (add_subdirectory):
The source directory
/tmp/hyperion/dependencies/external/protobuf
does not contain a CMakeLists.txt file.
CMake Error at dependencies/CMakeLists.txt:17 (export):
export given target "protoc_compiler" which is not built by this project.
CMake Error at dependencies/CMakeLists.txt:25 (get_property):
get_property could not find TARGET protoc_compiler. Perhaps it has not yet
been created.
-- Using protobuf compiler:
-- Configuring incomplete, errors occurred!
See also "/tmp/hyperion/CMakeFiles/CMakeOutput.log".
See also "/tmp/hyperion/CMakeFiles/CMakeError.log".
2015-01-25, 06:46
# get the Hyperion sources
git clone --recursive https://github.com/tvdzwan/hyperion.git "$HYPERION_DIR"
# if you forget the --resursive in above statement or you are updating an existing clone you need
# to clone the protobuf submodule by runnning the follwing two statements:
git submodule init
git submodule update
git clone --recursive https://github.com/tvdzwan/hyperion.git "$HYPERION_DIR"
# if you forget the --resursive in above statement or you are updating an existing clone you need
# to clone the protobuf submodule by runnning the follwing two statements:
git submodule init
git submodule update
2015-01-25, 12:13
I just figured it out and came here to post the solution an I see you already posted it!!
Thanks you for your help, much appreciated
Thanks you for your help, much appreciated
2015-01-25, 14:48
Sorry but another question. I cant get my LED strip to light but it looks like hyperion is ok. Any suggestions? I installed the android app and you can the Json conenction attempts.
When I run /usr/bin/hyperiond /etc/hyperion.config.json the leds light up for 2-3 secs but that is the only light I can get out of them
steve@htpc /opt/hyperion/config $ /usr/bin/hyperiond /etc/hyperion.config.json
Application build time: Jan 25 2015 10:02:33
QCoreApplication initialised
Selected configuration file: /etc/hyperion.config.json
ColorTransform 'default' => [0; 209]
Device configuration:
{
"colorOrder" : "rgb",
"name" : "MyPi",
"output" : "/dev/ttyUSB0",
"rate" : 115200,
"type" : "ws2801"
}
Black border threshold set to 0.01 (3)
Not creating any smoothing
Effect loaded: Knight rider
Effect loaded: Blue mood blobs
Effect loaded: Cold mood blobs
Effect loaded: Full color mood blobs
Effect loaded: Green mood blobs
Effect loaded: Red mood blobs
Effect loaded: Warm mood blobs
Effect loaded: Rainbow mood
Effect loaded: Rainbow swirl fast
Effect loaded: Rainbow swirl
Effect loaded: Snake
Effect loaded: Strobe blue
Effect loaded: Strobe Raspbmc
Effect loaded: Strobe white
Initializing Python interpreter
Hyperion created and initialised
run effect Rainbow swirl fast on channel 0
Boot sequence(Rainbow swirl fast) created and started
XBMC video checker created and started
The dispmanx framegrabber can not be instantiated, becuse it has been left out from the build
The framebuffer grabber can not be instantiated, becuse it has been left out from the build
Json server created and started on port 19444
Proto server created and started on port 19445
XBMC Connection error (0)
effect finished
XBMC Connection error (0)
New json connection
run effect Red mood blobs on channel 50
XBMC Connection error (0)
^CApplication closed with code 0
Json connection closed
Cleaning up Python interpreter
steve@htpc /opt/hyperion/config $ sudo vi hyperion.config.json
steve@htpc /opt/hyperion/config $
steve@htpc /opt/hyperion/config $
steve@htpc /opt/hyperion/config $
steve@htpc /opt/hyperion/config $ /usr/bin/hyperiond /etc/hyperion.config.json
Application build time: Jan 25 2015 10:02:33
QCoreApplication initialised
Selected configuration file: /etc/hyperion.config.json
ColorTransform 'default' => [0; 209]
Device configuration:
{
"colorOrder" : "rgb",
"name" : "MyPi",
"output" : "/dev/ttyUSB0",
"rate" : 115200,
"type" : "ws2801"
}
Black border threshold set to 0.01 (3)
Not creating any smoothing
Effect loaded: Knight rider
Effect loaded: Blue mood blobs
Effect loaded: Cold mood blobs
Effect loaded: Full color mood blobs
Effect loaded: Green mood blobs
Effect loaded: Red mood blobs
Effect loaded: Warm mood blobs
Effect loaded: Rainbow mood
Effect loaded: Rainbow swirl fast
Effect loaded: Rainbow swirl
Effect loaded: Snake
Effect loaded: Strobe blue
Effect loaded: Strobe Raspbmc
Effect loaded: Strobe white
Initializing Python interpreter
Hyperion created and initialised
run effect Knight rider on channel 0
Boot sequence(Knight rider) created and started
XBMC video checker created and started
The dispmanx framegrabber can not be instantiated, becuse it has been left out from the build
The framebuffer grabber can not be instantiated, becuse it has been left out from the build
Json server created and started on port 19444
Proto server created and started on port 19445
XBMC Connection error (0)
effect finished
XBMC Connection error (0)
New json connection
run effect Green mood blobs on channel 50
run effect Red mood blobs on channel 50
effect finished
XBMC Connection error (0)
run effect Rainbow swirl fast on channel
When I run /usr/bin/hyperiond /etc/hyperion.config.json the leds light up for 2-3 secs but that is the only light I can get out of them
steve@htpc /opt/hyperion/config $ /usr/bin/hyperiond /etc/hyperion.config.json
Application build time: Jan 25 2015 10:02:33
QCoreApplication initialised
Selected configuration file: /etc/hyperion.config.json
ColorTransform 'default' => [0; 209]
Device configuration:
{
"colorOrder" : "rgb",
"name" : "MyPi",
"output" : "/dev/ttyUSB0",
"rate" : 115200,
"type" : "ws2801"
}
Black border threshold set to 0.01 (3)
Not creating any smoothing
Effect loaded: Knight rider
Effect loaded: Blue mood blobs
Effect loaded: Cold mood blobs
Effect loaded: Full color mood blobs
Effect loaded: Green mood blobs
Effect loaded: Red mood blobs
Effect loaded: Warm mood blobs
Effect loaded: Rainbow mood
Effect loaded: Rainbow swirl fast
Effect loaded: Rainbow swirl
Effect loaded: Snake
Effect loaded: Strobe blue
Effect loaded: Strobe Raspbmc
Effect loaded: Strobe white
Initializing Python interpreter
Hyperion created and initialised
run effect Rainbow swirl fast on channel 0
Boot sequence(Rainbow swirl fast) created and started
XBMC video checker created and started
The dispmanx framegrabber can not be instantiated, becuse it has been left out from the build
The framebuffer grabber can not be instantiated, becuse it has been left out from the build
Json server created and started on port 19444
Proto server created and started on port 19445
XBMC Connection error (0)
effect finished
XBMC Connection error (0)
New json connection
run effect Red mood blobs on channel 50
XBMC Connection error (0)
^CApplication closed with code 0
Json connection closed
Cleaning up Python interpreter
steve@htpc /opt/hyperion/config $ sudo vi hyperion.config.json
steve@htpc /opt/hyperion/config $
steve@htpc /opt/hyperion/config $
steve@htpc /opt/hyperion/config $
steve@htpc /opt/hyperion/config $ /usr/bin/hyperiond /etc/hyperion.config.json
Application build time: Jan 25 2015 10:02:33
QCoreApplication initialised
Selected configuration file: /etc/hyperion.config.json
ColorTransform 'default' => [0; 209]
Device configuration:
{
"colorOrder" : "rgb",
"name" : "MyPi",
"output" : "/dev/ttyUSB0",
"rate" : 115200,
"type" : "ws2801"
}
Black border threshold set to 0.01 (3)
Not creating any smoothing
Effect loaded: Knight rider
Effect loaded: Blue mood blobs
Effect loaded: Cold mood blobs
Effect loaded: Full color mood blobs
Effect loaded: Green mood blobs
Effect loaded: Red mood blobs
Effect loaded: Warm mood blobs
Effect loaded: Rainbow mood
Effect loaded: Rainbow swirl fast
Effect loaded: Rainbow swirl
Effect loaded: Snake
Effect loaded: Strobe blue
Effect loaded: Strobe Raspbmc
Effect loaded: Strobe white
Initializing Python interpreter
Hyperion created and initialised
run effect Knight rider on channel 0
Boot sequence(Knight rider) created and started
XBMC video checker created and started
The dispmanx framegrabber can not be instantiated, becuse it has been left out from the build
The framebuffer grabber can not be instantiated, becuse it has been left out from the build
Json server created and started on port 19444
Proto server created and started on port 19445
XBMC Connection error (0)
effect finished
XBMC Connection error (0)
New json connection
run effect Green mood blobs on channel 50
run effect Red mood blobs on channel 50
effect finished
XBMC Connection error (0)
run effect Rainbow swirl fast on channel
2015-01-26, 16:48
You do not have type defined in config. I assume it is based on arduino and adalight.
2015-01-27, 14:48
2015-01-27, 14:50
adalight , excellent thanks guys.
Away from home at the moment but I will try it when get home at the weekend.
Really appreciate your help.
Away from home at the moment but I will try it when get home at the weekend.
Really appreciate your help.
2015-01-27, 14:55
(2015-01-27, 14:50)shuggard Wrote: adalight , excellent thanks guys.
Away from home at the moment but I will try it when get home at the weekend.
Really appreciate your help.
if you still have problem you can might change /dev/ttyUSB to /dev/ttyACM0
i think it doen´t make a big difference but mine ist running as ttyACM0
