[FernetMenta]

I just a couple of fixes to my vnsi branch: https://github.com/FernetMenta/xbmc-pvr-.../tree/vnsi

In case you want to try this make sure you checkout branch vnsi (git checkout vnsi)

Will be available in opdenkamp repo soon.

[cub69]

Hi there! That patch seems to have fixed my problem! I now have audio on all channels.

Thanks!
Cub

[unclejoe01]

Yep that branch works great on hd channels.

thanks for the fix

[ssss25]

Hello,

I must be doing something wrong... when I try to compile the VNSI plugin for VDR I now get:

Code:

Plugin vnsiserver:
make[1]: Entering directory `/usr/local/src/vdr-1.7.31/PLUGINS/src/vnsiserver'
make[1]: Leaving directory `/usr/local/src/vdr-1.7.31/PLUGINS/src/vnsiserver'
make[1]: Entering directory `/usr/local/src/vdr-1.7.31/PLUGINS/src/vnsiserver'
g++ -g -O3 -Wall -Werror=overloaded-virtual -Wno-parentheses -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -DREMOTE_KBD -DLIRC_DEVICE="/var/run/lirc/lircd" -D_GNU_SOURCE -DVIDEODIR="/video" -DCONFDIR="" -DCACHEDIR="" -DRESDIR="" -DPLUGINDIR="./PLUGINS/lib" -DLOCDIR="./locale" -I/usr/local/include -fPIC -c -D_GNU_SOURCE -DPLUGIN_NAME_I18N='"vnsiserver"' -DVNSI_SERVER_VERSION='"0.9.0"' -I/include vnsi.c
vnsi.c:27:24: fatal error: vdr/plugin.h: No such file or directory
compilation terminated.
make[1]: *** [vnsi.o] Error 1
make[1]: Leaving directory `/usr/local/src/vdr-1.7.31/PLUGINS/src/vnsiserver'

I don't get that if I do the root of the tree. only after I checkout branch or if I get the one from https://github.com/opdenkamp/xbmc-pvr-addons.git.

what am I doing wrong? plugin.h is in my vdr directory.

Thanks,

[FernetMenta]

set VDRDIR:
cd /usr/local/src/vdr-1.7.31
make VDRDIR=$(pwd) plugins

[ssss25]

Thanks! That works...

I was able to compile now. However, I have a new issue. when I select an HD channel, XBMC tells me "no signal" after few seconds. However, if I play the same channel from vdradmin (stream it) or softdevice, it works fine. SD channels play ok.

Code:

Jan  2 09:04:52 srvvdr vdr: [1757] VNSI: Client with ID 2 connected: 192.168.1.3:49587
Jan  2 09:04:52 srvvdr vdr: [2480] VNSI: Welcome client 'XBMC Media Center' with protocol version '3'
Jan  2 09:04:52 srvvdr vdr: [1716] EEPG: setstatus 0
Jan  2 09:04:52 srvvdr vdr: [1716] EEPG: setstatus 1
Jan  2 09:04:52 srvvdr vdr: [1716] EEPG: Filter Pid:0x0,Tid:0x0 added.
Jan  2 09:04:52 srvvdr vdr: [2480] VNSI: Creating new live Receiver
Jan  2 09:04:52 srvvdr vdr: [2480] VNSI: Successfully switched to channel CCCC - CHANNEL
Jan  2 09:04:52 srvvdr vdr: [2480] VNSI: Started streaming of channel YTVHD (timeout 10 seconds)
Jan  2 09:04:52 srvvdr vdr: [2482] receiver on device 1 thread started (pid=, tid=yyyy)
Jan  2 09:04:52 srvvdr vdr: [2481] cLiveStreamer stream processor thread started (pid=xxxx, tid=yyyy)
Jan  2 09:04:52 srvvdr vdr: [2483] TS buffer on device 1 thread started (pid=, tid=yyyy)
Jan  2 09:04:52 srvvdr vdr: [2481] VNSI: Created stream demuxer for pid=zzzz and type=8
Jan  2 09:04:52 srvvdr vdr: [2483] TS buffer on device 1 thread ended (pid=, tid=yyyy)
Jan  2 09:04:52 srvvdr vdr: [2482] buffer stats: 2444 (0%) used
Jan  2 09:04:52 srvvdr vdr: [2482] receiver on device 1 thread ended (pid=xxxx, tid=yyyy)
Jan  2 09:04:52 srvvdr vdr: [2484] receiver on device 1 thread started (pid=xxxx, tid=yyyy)
Jan  2 09:04:52 srvvdr vdr: [2485] TS buffer on device 1 thread started (pid=xxxx, tid=yyyy)
Jan  2 09:04:53 srvvdr vdr: [1716] EEPG: PMT scan idle
Jan  2 09:04:53 srvvdr vdr: [1716] EEPG: Ended all processing
Jan  2 09:05:02 srvvdr vdr: [2481] VNSI: No Signal

Any ideas, I'll search around to see if there is a similar issue.

BTW, my XBMC plugin is 1.6.3. I am not sure how to upgrade that if there is a new version.

Thanks,

[FernetMenta]

1)
Are you located in an ATSC region? If so check your setup.conf for parameter "StandardCompliance". Should have a value of 1 in ATSC regions.

2)
Would it make any difference if you disabled eepg?

[ssss25]

FernetMenta,

Thanks for your quick responses...

1) Yes. in my VDR setup.conf, I do have it set to 1. I am in NA.
2) I rerun VDR without the eepg plugin, I still get NO signal, and syslog shows:

Code:

Jan  2 13:22:58 srvvdr vdr: [2908] loading /etc/vdr/plugins/vnsiserver/allowed_hosts.conf
Jan  2 13:22:58 srvvdr vdr: [2908] VNSI: Client with ID 3 connected: 192.168.1.3:50211
Jan  2 13:22:58 srvvdr vdr: [2936] VNSI: Welcome client 'XBMC Media Center' with protocol version '3'
Jan  2 13:22:58 srvvdr vdr: [2936] VNSI: Creating new live Receiver
Jan  2 13:22:58 srvvdr vdr: [2936] VNSI: Successfully switched to channel #### - HDCHANNEL
Jan  2 13:22:58 srvvdr vdr: [2936] VNSI: Started streaming of channel ####  (timeout 10 seconds)
Jan  2 13:22:58 srvvdr vdr: [2938] receiver on device 1 thread started (pid=xxxx, tid=xxxx)
Jan  2 13:22:58 srvvdr vdr: [2937] cLiveStreamer stream processor thread started (pid=xxxx, tid=xxxx)
Jan  2 13:22:58 srvvdr vdr: [2939] TS buffer on device 1 thread started (pid=xxxx, tid=xxxx)
Jan  2 13:22:58 srvvdr vdr: [2937] VNSI: Created stream demuxer for pid=xxxx and type=8
Jan  2 13:22:58 srvvdr vdr: [2937] VNSI: Created stream demuxer for pid=xxxx and type=1
Jan  2 13:22:58 srvvdr vdr: [2937] VNSI: Created stream demuxer for pid=xxxx and type=1
Jan  2 13:22:58 srvvdr vdr: [2939] TS buffer on device 1 thread ended (pid=xxxx, tid=xxxx)
Jan  2 13:22:58 srvvdr vdr: [2938] buffer stats: 70312 (1%) used
Jan  2 13:22:58 srvvdr vdr: [2938] receiver on device 1 thread ended (pid=xxxx, tid=xxxx)
Jan  2 13:22:58 srvvdr vdr: [2940] receiver on device 1 thread started (pid=xxxx, tid=xxxx)
Jan  2 13:22:58 srvvdr vdr: [2941] TS buffer on device 1 thread started (pid=xxxx, tid=xxxx)
Jan  2 13:23:08 srvvdr vdr: [2937] VNSI: No Signal

Please note that before this last update, I was able to go to all channels no problem in XBMC, I just didn't have audio in HD channels. However now, I can go to SD channels in XBMC, but HD channels show me no Signal in XBMC.

Again, I did stream channel from vdr admin without any problem.

Thanks,