Guest - Testers are needed for the reworked CDateTime core component. See... https://forum.kodi.tv/showthread.php?tid=378981 (September 29) x
  • 1
  • 6
  • 7
  • 8(current)
  • 9
  • 10
  • 15
Release Aerial (ATV4 Screensavers)
Really nice work! Nice to have these playing away in the background while I work Big Grin

As someone previously mentioned, the screensaver always starts with the same movie (LAX airport on my build).

Could you please add a randomise function that would create a new/random playlist everytime the saver runs?
Maybe this could obey the location list too so the saver only shows random movies from the active locations.

Thanks for your hard work..it's a new fave addon!
Reply
Hello,

how can i uninstall the screensaver? the Buttons to uninstall and deactivate are grey/not usable.
I´m using RaspBerry3 Model B with Kodi 16.1 and LibreElec.
Can you help me`Sorry for bad english Angel
Reply
I do have a Problem with this ScreenSaver. I do like it a lot but:
It want always to start after 5 minutes even while I watch tv or movies.
It can´t start while I listen to music but I want it to.
It changes the resolution so my tv switches to the channel and I don't want that to happened.

What can we do?
Reply
(2017-01-23, 11:25)vip3r78 Wrote: Hello,

how can i uninstall the screensaver? the Buttons to uninstall and deactivate are grey/not usable.
I´m using RaspBerry3 Model B with Kodi 16.1 and LibreElec.
Can you help me`Sorry for bad english Angel

1) switch to OTHER screensaver
2) uninstall ATV4

Simple and logical? Smile It can't uninstall if it's being used....
Reply
(2017-02-03, 13:09)tjost Wrote: I do have a Problem with this ScreenSaver. I do like it a lot but:
It want always to start after 5 minutes even while I watch tv or movies.
It can´t start while I listen to music but I want it to.
It changes the resolution so my tv switches to the channel and I don't want that to happened.

What can we do?

If you want screensaver during music, turn off the visualization.

Can't have it while watching the movies.
Reply
Problems since updating to 1.4.0:

- The addon is now under video addons for some reason

- When listening to music with fanart visualisation, it now overrrides that - which it hadn't done before
Reply
I searched through this thread but didn't see anything relative...

Has anyone observed a great amount of data usage with this screensaver? I'm running the official Kodi 17 final release on my Amazon Fire TV. I know there has been an issue with data usage on the Fire TV with Amazon's screen saver but I have that disabled. I had been running just the DIM screen saver and had not noticed any issues. But when I switched to Aerial I saw about 20GB of data usage in one day. I switched back to DIM and barely had any data usage. The following day I switched again to Aerial and burned another 20GB in about a day. Sure seems like there could be an issue.

Thanks!
Reply
Ofcourse it has data usage when it streams HD video from the net.... Smile
Reply
Seriously? It is actually streaming video from the net as if I were watching a movie off Netflix?? That seems like a poor design. I would have figured it would download each video once and cache them. If that's the case, then I need to pick another screensaver.
Reply
Well there is the option to download all videos once....
Reply
Thanks. I'll look for that option. I'm guessing somewhere in the Config... it is a really spectacular screensaver on my 80".
Reply
I'm using the git version 1.4 for the DPMS settings. I have it set to turn off the display after a specified period of time. When I wake the PC back up (or just press a button to turn the monitor back on) Kodi crashes, locks up and I need to force quit. It looks like the specific error message immediately before crash: WARNING: CSkinInfo: failed to load skin settings. Not sure if this is an issue with the screen saver or an issue with the skin.

Possibly relevant debug info:

Code:
09:26:05.617 T:6316  NOTICE: VideoPlayer: Opening: C:\Media\Watched\b3-3.mov
09:26:05.617 T:6316 WARNING: CDVDMessageQueue(player)::Put MSGQ_NOT_INITIALIZED
09:26:05.617 T:6316   ERROR: DXVA::CProcessorHD::IsFormatSupported: Unsupported format 104 for 1.
09:26:05.617 T:6316   ERROR: DXVA::CProcessorHD::IsFormatSupported: Unsupported format 105 for 1.
09:26:05.617 T:6260  NOTICE: Creating InputStream
09:26:05.622 T:6260  NOTICE: Creating Demuxer
09:26:05.737 T:6260  NOTICE: Opening stream: 0 source: 256
09:26:05.737 T:6260  NOTICE: Creating video codec with codec id: 28
09:26:05.737 T:6260  NOTICE: CDVDVideoCodecFFmpeg::Open() Using codec: H.264 / AVC / MPEG-4 AVC / MPEG-4 part 10
09:26:05.737 T:6260  NOTICE: Creating video thread
09:26:05.737 T:4520  NOTICE: running thread: video_thread
09:26:05.742 T:4520  NOTICE: CDVDVideoCodecFFmpeg::GetFormat - Creating DXVA(1920x1080)
09:26:05.814 T:6316  NOTICE: D3D: rendering method forced to DXVA processor
09:26:05.814 T:6316  NOTICE: DXVA::CProcessorHD::InitProcessor: Supported deinterlace methods: Blend:no, Bob:yes, Adaptive:yes, MoComp:yes.
09:26:05.815 T:6316 WARNING: CWinRenderer::UpdateVideoFilter - chosen scaling method 1 is not supported by renderer
09:26:05.816 T:6260 WARNING: CDVDMessageQueue(audio)::Put MSGQ_NOT_INITIALIZED
09:26:06.070 T:4520  NOTICE: CDVDVideoCodecFFmpeg::CDropControl: calculated diff time: 33333
09:27:05.825 T:6316  NOTICE: CVideoPlayer::CloseFile()
09:27:05.825 T:6316  NOTICE: VideoPlayer: waiting for threads to exit
09:27:05.827 T:6260  NOTICE: CVideoPlayer::OnExit()
09:27:05.827 T:6260  NOTICE: Closing stream player 2
09:27:05.827 T:6260  NOTICE: waiting for video thread to exit
09:27:05.876 T:4520  NOTICE: thread end: video_thread
09:27:05.879 T:6260  NOTICE: deleting video codec
09:27:05.883 T:6260  NOTICE: DXVA::CDecoder::Close - closing decoder
09:27:05.883 T:6260  NOTICE: DXVA::Close - closing decoder context
09:27:05.884 T:6316  NOTICE: VideoPlayer: finished waiting
09:27:05.920 T:6316  NOTICE: CVideoPlayer::CloseFile()
09:27:05.920 T:6316  NOTICE: VideoPlayer: waiting for threads to exit
09:27:05.920 T:6316  NOTICE: VideoPlayer: finished waiting
09:27:05.920 T:6316  NOTICE: CVideoPlayer::CloseFile()
09:27:05.920 T:6316  NOTICE: VideoPlayer: waiting for threads to exit
09:27:05.920 T:6316  NOTICE: VideoPlayer: finished waiting
09:27:06.897 T:1624 WARNING: CSkinInfo: failed to load skin settings
Reply
This is exactly my problem! I'm using Kodi 17 on Sony Bravia kd-55xd8005. Everything was working fine with Kodi 16.1 until update to Kodi 17. Then this amazing screensaver start freezing after wake up TV

(2017-02-17, 17:40)chubbs Wrote: I'm using the git version 1.4 for the DPMS settings. I have it set to turn off the display after a specified period of time. When I wake the PC back up (or just press a button to turn the monitor back on) Kodi crashes, locks up and I need to force quit. It looks like the specific error message immediately before crash: WARNING: CSkinInfo: failed to load skin settings. Not sure if this is an issue with the screen saver or an issue with the skin.

Possibly relevant debug info:

Code:
09:26:05.617 T:6316  NOTICE: VideoPlayer: Opening: C:\Media\Watched\b3-3.mov
09:26:05.617 T:6316 WARNING: CDVDMessageQueue(player)::Put MSGQ_NOT_INITIALIZED
09:26:05.617 T:6316   ERROR: DXVA::CProcessorHD::IsFormatSupported: Unsupported format 104 for 1.
09:26:05.617 T:6316   ERROR: DXVA::CProcessorHD::IsFormatSupported: Unsupported format 105 for 1.
09:26:05.617 T:6260  NOTICE: Creating InputStream
09:26:05.622 T:6260  NOTICE: Creating Demuxer
09:26:05.737 T:6260  NOTICE: Opening stream: 0 source: 256
09:26:05.737 T:6260  NOTICE: Creating video codec with codec id: 28
09:26:05.737 T:6260  NOTICE: CDVDVideoCodecFFmpeg::Open() Using codec: H.264 / AVC / MPEG-4 AVC / MPEG-4 part 10
09:26:05.737 T:6260  NOTICE: Creating video thread
09:26:05.737 T:4520  NOTICE: running thread: video_thread
09:26:05.742 T:4520  NOTICE: CDVDVideoCodecFFmpeg::GetFormat - Creating DXVA(1920x1080)
09:26:05.814 T:6316  NOTICE: D3D: rendering method forced to DXVA processor
09:26:05.814 T:6316  NOTICE: DXVA::CProcessorHD::InitProcessor: Supported deinterlace methods: Blend:no, Bob:yes, Adaptive:yes, MoComp:yes.
09:26:05.815 T:6316 WARNING: CWinRenderer::UpdateVideoFilter - chosen scaling method 1 is not supported by renderer
09:26:05.816 T:6260 WARNING: CDVDMessageQueue(audio)::Put MSGQ_NOT_INITIALIZED
09:26:06.070 T:4520  NOTICE: CDVDVideoCodecFFmpeg::CDropControl: calculated diff time: 33333
09:27:05.825 T:6316  NOTICE: CVideoPlayer::CloseFile()
09:27:05.825 T:6316  NOTICE: VideoPlayer: waiting for threads to exit
09:27:05.827 T:6260  NOTICE: CVideoPlayer::OnExit()
09:27:05.827 T:6260  NOTICE: Closing stream player 2
09:27:05.827 T:6260  NOTICE: waiting for video thread to exit
09:27:05.876 T:4520  NOTICE: thread end: video_thread
09:27:05.879 T:6260  NOTICE: deleting video codec
09:27:05.883 T:6260  NOTICE: DXVA::CDecoder::Close - closing decoder
09:27:05.883 T:6260  NOTICE: DXVA::Close - closing decoder context
09:27:05.884 T:6316  NOTICE: VideoPlayer: finished waiting
09:27:05.920 T:6316  NOTICE: CVideoPlayer::CloseFile()
09:27:05.920 T:6316  NOTICE: VideoPlayer: waiting for threads to exit
09:27:05.920 T:6316  NOTICE: VideoPlayer: finished waiting
09:27:05.920 T:6316  NOTICE: CVideoPlayer::CloseFile()
09:27:05.920 T:6316  NOTICE: VideoPlayer: waiting for threads to exit
09:27:05.920 T:6316  NOTICE: VideoPlayer: finished waiting
09:27:06.897 T:1624 WARNING: CSkinInfo: failed to load skin settings
Reply
Just for more troubleshooting information: I tried to use Kodi & Manual settings, and pause video & stop video. All resulted in the same issue. I also tried it using Eminence 2.0 & Estuary so I don't believe it is a skin issue. I am running windows 10 exe version 17

If you make any fixes or add temporary debugging code to the addon, let me know and I can test.
Reply
Bug 
(2017-02-16, 21:24)DaLanik Wrote: Well there is the option to download all videos once....

Hi,

thanks for great addon.. I would like to store files offline so I chose download folder (/storage/download) but when I press download button, dialog pops up saying I need to choose download folder.. :S I tried with different folder too (/.../.../SLICE-HD/) but without success.. Is this known bug or I did something wrong?!

thanks in advance

Cheers
Reply
  • 1
  • 6
  • 7
  • 8(current)
  • 9
  • 10
  • 15

Logout Mark Read Team Forum Stats Members Help
Aerial (ATV4 Screensavers)6