2018-09-08, 21:09
Dear Kore Remote Developers!
First, i like to say Thank You for this wonderful Android app that made me to jump on, and started using Kodi for the first time. Right now i was not yet fully in to it... i am learning it in a small casual setup. (On a bedroom players with a small hand of Movies and TV shows).
I read every instruction how i must prepare my Movie collection Cover Arts to correctly processed by the Kodi scraper. Because i really wanted this to be "perfect" i even re scaled almost every Posters in my movies and tv shows collection to an EXACT 1:1.5 aspect ratio! (Interesting that almost every single one them i have, was incorrect in a small amount, but not anymore.)
Ironically my perfectionism is not fully get appreciated by your wonderful Kore Android remote control, because in almost every place where the Kore remote is displaying the Poster art was not "tweaked" to show "fully" a pictures with a perfect 1:1.5 aspect ratio. In most of the places the Posters Horizontal or Vertical edges is missing ... cut it out. The imperfection is very noticeable on Posters with various colored frame edges, or on a Posters with edge to edge Title Text, etc.
I know this is a small little things that not really important in many users mind, and it is not even a bug after all, but i am confident that there are a very good reason Kodi development is encouraging users to follow their Posters Aspect Ratio rules, and not just fooling around!?
That is why i like to help a little to resolve this issues and you can make the Android Kore Remote control even greater!
The following "correction" is needed to make in two XML files in the "Res" directory (inside the app) to achieve this...
Res / Values-sw600dp / dimens. xml
Line 32 "movielist_art_heigth">124.0dip to 126.0dip
Line 33 "movielist_art_width">86.0dip to 84.0dip
Line 37 "now_playing_poster_height">200.0dip to 204.0dip
Line 39 "now_playing_poster_width">140.0dip to 136.0dip
Line 40 "playlist_art_heigth">86.0dip to 84.0dip
Line 41 "playlist_art_width">68.0dip to 56.0dip
Line 45 "remote_poster_height">162.0dip to 162.0dip
Line 46 "remote_poster_width">96.0dip to 94.0dip (Note!)
This setting does not following the "1:1.5 logic" for some reasons?
But the new width value 94.0dip is showed me the best result!
Line 47 "seasonlist_art_heigth">124.0dip to 126.0dip
Line 48 "seasonlist_art_width">86.0dip to 84.0dip
Line 49 "tvshowlist_art_heigth">124.0dip to 126.0dip
Line 50 "tvshowlist_art_width">86.0dip to 84.0dip
Res / values / dimens. xml
Line 150 "detail_poster_height_nonsquare">160.0dip to 162.0dip
Line 152 "detail_poster_width_nonsquare">112.0dip to 108.0dip
Line 211 "now_playing_panel_art_width">48.0dip to 44.0dip
Line 212 "now_playing_panel_height">64.0dip to 66.0dip
For calculating the new values, i followed two simple rule..
1. The Height and the Width dip values was made to match 1:1.5 to each others respectively.
2. For choosing the new closest values, i always started with a Height numbers by trying to dived it first by 3. If the result was a not contained a fractions i choosed that number for Height values, then i calculated the Width values that of course is 2/3 to the Height. Simple.
After this little easy correction, all my wonderfully made Posters Arts is showing up nicely without any missing edges in the Android Kore Remote Control app!
Thank you for listening, and i hope that my little info was useful!?
Best Regards!
I have just one question please ....
The method i presented here my issues and my workarounds, was acceptable? Can i do the same an other time if i encountered something other.... not so important but with a workarounds as well? Thanks!
First, i like to say Thank You for this wonderful Android app that made me to jump on, and started using Kodi for the first time. Right now i was not yet fully in to it... i am learning it in a small casual setup. (On a bedroom players with a small hand of Movies and TV shows).
I read every instruction how i must prepare my Movie collection Cover Arts to correctly processed by the Kodi scraper. Because i really wanted this to be "perfect" i even re scaled almost every Posters in my movies and tv shows collection to an EXACT 1:1.5 aspect ratio! (Interesting that almost every single one them i have, was incorrect in a small amount, but not anymore.)
Ironically my perfectionism is not fully get appreciated by your wonderful Kore Android remote control, because in almost every place where the Kore remote is displaying the Poster art was not "tweaked" to show "fully" a pictures with a perfect 1:1.5 aspect ratio. In most of the places the Posters Horizontal or Vertical edges is missing ... cut it out. The imperfection is very noticeable on Posters with various colored frame edges, or on a Posters with edge to edge Title Text, etc.
I know this is a small little things that not really important in many users mind, and it is not even a bug after all, but i am confident that there are a very good reason Kodi development is encouraging users to follow their Posters Aspect Ratio rules, and not just fooling around!?
That is why i like to help a little to resolve this issues and you can make the Android Kore Remote control even greater!
The following "correction" is needed to make in two XML files in the "Res" directory (inside the app) to achieve this...
Res / Values-sw600dp / dimens. xml
Line 32 "movielist_art_heigth">124.0dip to 126.0dip
Line 33 "movielist_art_width">86.0dip to 84.0dip
Line 37 "now_playing_poster_height">200.0dip to 204.0dip
Line 39 "now_playing_poster_width">140.0dip to 136.0dip
Line 40 "playlist_art_heigth">86.0dip to 84.0dip
Line 41 "playlist_art_width">68.0dip to 56.0dip
Line 45 "remote_poster_height">162.0dip to 162.0dip
Line 46 "remote_poster_width">96.0dip to 94.0dip (Note!)
This setting does not following the "1:1.5 logic" for some reasons?
But the new width value 94.0dip is showed me the best result!
Line 47 "seasonlist_art_heigth">124.0dip to 126.0dip
Line 48 "seasonlist_art_width">86.0dip to 84.0dip
Line 49 "tvshowlist_art_heigth">124.0dip to 126.0dip
Line 50 "tvshowlist_art_width">86.0dip to 84.0dip
Res / values / dimens. xml
Line 150 "detail_poster_height_nonsquare">160.0dip to 162.0dip
Line 152 "detail_poster_width_nonsquare">112.0dip to 108.0dip
Line 211 "now_playing_panel_art_width">48.0dip to 44.0dip
Line 212 "now_playing_panel_height">64.0dip to 66.0dip
For calculating the new values, i followed two simple rule..
1. The Height and the Width dip values was made to match 1:1.5 to each others respectively.
2. For choosing the new closest values, i always started with a Height numbers by trying to dived it first by 3. If the result was a not contained a fractions i choosed that number for Height values, then i calculated the Width values that of course is 2/3 to the Height. Simple.
After this little easy correction, all my wonderfully made Posters Arts is showing up nicely without any missing edges in the Android Kore Remote Control app!
Thank you for listening, and i hope that my little info was useful!?
Best Regards!
I have just one question please ....
The method i presented here my issues and my workarounds, was acceptable? Can i do the same an other time if i encountered something other.... not so important but with a workarounds as well? Thanks!