Login at Kodi Home

wags1 · 2019-04-21, 14:52

(2019-04-21, 06:38)Sei4eto Wrote: I made a new Pandora account and everything started to work as usual. If I change back to my old account - the same issue appears again ( cannot cache songs, only can stream them).
I will see how long the new account will work before/if the issue will appear.

Is it a free account? As I noted in my previous post, I have not seen this issue but I use a paid Pandora subscription.

Sei4eto · 2019-04-21, 21:38

They are both free accounts.
... And the second account stopped caching songs as well.
I'm going back to 0.9.3 - lower quality but serves me better.
Thank you!

wags1 · 2019-04-21, 22:37

(2019-04-21, 21:38)Sei4eto Wrote: They are both free accounts.
... And the second account stopped caching songs as well.
I'm going back to 0.9.3 - lower quality but serves me better.
Thank you!

As I indicated, I use a paid account and have never experienced the problem. Perhaps it is an issue with using a free account?

aci11 · 2019-06-15, 21:40

Hi,

I have some trouble logging in to Pandora with Pandoki v0.9.3 for several weeks now. Hence, I want to try installing Pandoki 0.9.4(a). Unfortunately, I can't find the zip file. The repository repository.rocky4546-0.2.1.zip only contains Pandora Slim (v0.4.2?!). Could someone please point me to the zip file for the latest Pandoki version?!

Many thanks in advance!

wags1 · 2019-06-15, 23:07

(2019-06-15, 21:40)aci11 Wrote: Hi,

I have some trouble logging in to Pandora with Pandoki v0.9.3 for several weeks now. Hence, I want to try installing Pandoki 0.9.4(a). Unfortunately, I can't find the zip file. The repository repository.rocky4546-0.2.1.zip only contains Pandora Slim (v0.4.2?!). Could someone please point me to the zip file for the latest Pandoki version?!

Many thanks in advance!

Try updating the repository. I’m looking at the rocky4546’s xbmc addon repository and I see both Pandora slim and Pandoki 0.9.4A listed there.

rocky4546 · 2019-06-16, 01:43

Hi aci11. I am the new developer working the Pandoki updates. I have only been updating the Pandoki and not the Pandora Slim. It is still whatever was in the old repo (0.4.2). For Pandoki, the latest version is 0.9.4a and is available directly at
https://github.com/rocky4546/gominoa-xbm...io.pandoki
The repo that points to all the versions (old and new) is located here
https://github.com/rocky4546/gominoa-xbm....rocky4546
version 0.2.1

dschlic1 · 2019-07-21, 14:37

I had Pandoki 0.0.3 installed, and it would not queue songs. Ut would get and play the first, but that was the only one. I have a free account. So I updated to 0.9.4(a) and now it will not log into my account, I get login failed message.

rocky4546 · 2019-07-21, 15:31

Hmm, check a few things. Make sure you can still log into the pandora website. Next, go to the add on userdata folder and check the settings.xml inside the pandoki folder. We did not change the authentication component, so it should be one of those. If it worked before with your current password, it should still work. If you recently changed your password, let us know.

dschlic1 · 2019-07-23, 21:41

(2019-07-21, 15:31)rcmccaslin Wrote: Hmm, check a few things. Make sure you can still log into the pandora website. Next, go to the add on userdata folder and check the settings.xml inside the pandoki folder. We did not change the authentication component, so it should be one of those. If it worked before with your current password, it should still work. If you recently changed your password, let us know.

The password looked good, repasted into the settings.xml file. It is working now. Thanks.

chrisfromwa · 2019-08-16, 03:06

Hi Everyone,
I'm sorry if this has been answered somewhere in the thread, but I can't seem to find the same issue.

I'm using a Raspberry PI 3b+
Kodi Leia

I had Pandoki working at one point, but I needed to reflash my SD card.
So I've re-downloaded the ZIP, and tried to install from the repository version .09.4

It installed, but when I try and run it. I get an error message about not being logged in. Would you like to go to the settings screen.
I select yes, it pops up a new window which I assume is where I'm supposed to enter my credentials. But it's blanks.

Just a scrolling bar at the top that says 'no categories available.'

I just can't remember doing anything special when I had this working earlier.
Anyone know what I need to do?

chrisfromwa · 2019-08-16, 03:50

(2019-08-16, 03:06)chrisfromwa Wrote: Hi Everyone,
I'm sorry if this has been answered somewhere in the thread, but I can't seem to find the same issue.

I'm using a Raspberry PI 3b+
Kodi Leia

I had Pandoki working at one point, but I needed to reflash my SD card.
So I've re-downloaded the ZIP, and tried to install from the repository version .09.4

It installed, but when I try and run it. I get an error message about not being logged in. Would you like to go to the settings screen.
I select yes, it pops up a new window which I assume is where I'm supposed to enter my credentials. But it's blanks.

Just a scrolling bar at the top that says 'no categories available.'

I just can't remember doing anything special when I had this working earlier.
Anyone know what I need to do?

I just checked the Kodi version and it's 18.2. Not sure if that matters?
I'm also seeing this strange behavior with any add-on I install. Anyone know what could be causing this? Or how to fix it?

wags1 · 2019-08-16, 04:28

(2019-08-16, 03:50)chrisfromwa Wrote:
(2019-08-16, 03:06)chrisfromwa Wrote: Hi Everyone,
I'm sorry if this has been answered somewhere in the thread, but I can't seem to find the same issue.

I'm using a Raspberry PI 3b+
Kodi Leia

I had Pandoki working at one point, but I needed to reflash my SD card.
So I've re-downloaded the ZIP, and tried to install from the repository version .09.4

It installed, but when I try and run it. I get an error message about not being logged in. Would you like to go to the settings screen.
I select yes, it pops up a new window which I assume is where I'm supposed to enter my credentials. But it's blanks.

Just a scrolling bar at the top that says 'no categories available.'

I just can't remember doing anything special when I had this working earlier.
Anyone know what I need to do?

I just checked the Kodi version and it's 18.2. Not sure if that matters?
I'm also seeing this strange behavior with any add-on I install. Anyone know what could be causing this? Or how to fix it?

It really shouldn’t matter but just FYI, the current release version of Leia is 18.3.
Instead of clicking yes when that dialog pops up, go into the Pandoki addon itself and configure it with your credentials - add-ons, my add-ons, music add-ons, Pandoki, then click on configure. That should get you to the screen where you can enter your Pandora credentials.

chrisfromwa · 2019-08-17, 18:02

(2019-08-16, 04:28)wags1 Wrote:
(2019-08-16, 03:50)chrisfromwa Wrote:
(2019-08-16, 03:06)chrisfromwa Wrote: Hi Everyone,
I'm sorry if this has been answered somewhere in the thread, but I can't seem to find the same issue.

I'm using a Raspberry PI 3b+
Kodi Leia

I had Pandoki working at one point, but I needed to reflash my SD card.
So I've re-downloaded the ZIP, and tried to install from the repository version .09.4

It installed, but when I try and run it. I get an error message about not being logged in. Would you like to go to the settings screen.
I select yes, it pops up a new window which I assume is where I'm supposed to enter my credentials. But it's blanks.

Just a scrolling bar at the top that says 'no categories available.'

I just can't remember doing anything special when I had this working earlier.
Anyone know what I need to do?

I just checked the Kodi version and it's 18.2. Not sure if that matters?
I'm also seeing this strange behavior with any add-on I install. Anyone know what could be causing this? Or how to fix it?

It really shouldn’t matter but just FYI, the current release version of Leia is 18.3.
Instead of clicking yes when that dialog pops up, go into the Pandoki addon itself and configure it with your credentials - add-ons, my add-ons, music add-ons, Pandoki, then click on configure. That should get you to the screen where you can enter your Pandora credentials.

Ya I tried that, looks to be a KODI issue as every add-on displays the same screen and none can be configured at all.
anyone have any ideas?

aci11 · 2019-12-20, 17:05

Hi,

I have some trouble (for several months now) getting Pandoki to work on a Mibox S using a proxy (Orbot/Tor). Orbot seems to work fine, however, I always get an "HTTP Error 405: Method Not Allowed". See log below.
https://pastebin.com/embed_js/zGBAn1sS

I use the "cache only" mode in Pandoki and I have configured Pandoki to use the HTTP proxy port of Orbot (8118).

Can anyone help me please?

Many thanks in advance,
Aci11

PS: The same configuration (Orbot + Pandoki with (apparently) same configuration) has been working for many years on my older Android TV box.

aci11 · 2019-12-20, 21:06

(2019-12-20, 17:05)aci11 Wrote: Hi,

I have some trouble (for several months now) getting Pandoki to work on a Mibox S using a proxy (Orbot/Tor). Orbot seems to work fine, however, I always get an "HTTP Error 405: Method Not Allowed". See log below.
https://pastebin.com/embed_js/zGBAn1sS

I use the "cache only" mode in Pandoki and I have configured Pandoki to use the HTTP proxy port of Orbot (8118).

Can anyone help me please?

Many thanks in advance,
Aci11

PS: The same configuration (Orbot + Pandoki with (apparently) same configuration) has been working for many years on my older Android TV box.

Sorry, the log file via pastebin does not seem to work. Here it is again: https://paste.kodi.tv/uzesoxenal.kodi