[sdfg]

Hi, I'm using STB Atto Pixel (SoC: Hi3798Cv200) but I will add compatibility with STB Atto Pixel Premium (SoC: Hi3798Mv200) too.

Hi Leandro, very good project!
I have an Octagon sf8008 (SoC: Hi3798Mv200).
Your releases will be restricted to Atto Pixel Premium or will be compatible with other Hi3798Mv200 STBs?
Thank you,
sdf

[leandrotsampa]

Hi, I'm using STB Atto Pixel (SoC: Hi3798Cv200) but I will add compatibility with STB Atto Pixel Premium (SoC: Hi3798Mv200) too.

Hi Leandro, very good project!
I have an Octagon sf8008 (SoC: Hi3798Mv200).
Your releases will be restricted to Atto Pixel Premium or will be compatible with other Hi3798Mv200 STBs?
Thank you,
sdf

Hi, thanks.
Can work with other's STBs, but probably will need some fixes to work Tuner, RC and Front Display.

[Midozalouk]

Hi, I'm using STB Atto Pixel (SoC: Hi3798Cv200) but I will add compatibility with STB Atto Pixel Premium (SoC: Hi3798Mv200) too.

Hi Leandro, very good project!
I have an Octagon sf8008 (SoC: Hi3798Mv200).
Your releases will be restricted to Atto Pixel Premium or will be compatible with other Hi3798Mv200 STBs?
Thank you,
sdf

Hi, thanks.
Can work with other's STBs, but probably will need some fixes to work Tuner, RC and Front Display.

Hello Sir

how would you plan to make it work on STb ?

we dont have Android in Octagon and other STb

will your plugin install Debian on it ? and android

M.O

[Midozalouk]

How did you loaded Enigma2 from Debian ?

or you need to switch between them ??

Hi, I'm using STB Atto Pixel (SoC: Hi3798Cv200) but I will add compatibility with STB Atto Pixel Premium (SoC: Hi3798Mv200) too.
All this is very simple, I put Debian without interface and install all the rest as a systemd service.
And yes, from Enigma2 you can open KODI or RetroArch (and can install anything in Debian too ;P).
You can change to boot KODI with TVheadend or RetroArch if you not want Enigma2.
You can see more info here: GitHub

Do you lose android with this script ?

i see it allows you to dual boot android with enigam2 

where is Debian ?

do you support dvb sx2 or not ?

will i e ale to install libreleec o it ??

sorry for the may Qs?

[leandrotsampa]

Hello Sir

how would you plan to make it work on STb ?

we dont have Android in Octagon and other STb

will your plugin install Debian on it ? and android

M.O

Installation process is in GitHub or in Site and it's already working.
It's a Dual Boot like any other.

[Midozalouk]

Hello Sir

how would you plan to make it work on STb ?

we dont have Android in Octagon and other STb

will your plugin install Debian on it ? and android

M.O

Installation process is in GitHub or in Site and it's already working.
It's a Dual Boot like any other.

you mean just using this command 


dd if=/media/sda1/e2d-armhf-pixel.img of=/dev/mmcblk1


i think it wont work on stb 

[leandrotsampa]

Hello Sir

how would you plan to make it work on STb ?

we dont have Android in Octagon and other STb

will your plugin install Debian on it ? and android

M.O

Installation process is in GitHub or in Site and it's already working.
It's a Dual Boot like any other.

you mean just using this command 


dd if=/media/sda1/e2d-armhf-pixel.img of=/dev/mmcblk1


i think it wont work on stb 

It's to write sdcard.
To enable dual boot need apply e2d-armhf-pixel.upk by Android or Recovery mode, but this file is for STB Atto Pixel.

[Midozalouk]

Installation process is in GitHub or in Site and it's already working.
It's a Dual Boot like any other.

you mean just using this command 


dd if=/media/sda1/e2d-armhf-pixel.img of=/dev/mmcblk1


i think it wont work on stb 

It's to write sdcard.
To enable dual boot need apply e2d-armhf-pixel.upk by Android or Recovery mode, but this file is for STB Atto Pixel.

Hello Sir

i have searched for the specification of atto pixel premium but i couldn't find it
can you help me with it ?

how may tuner it haves and its type  ??

[leandrotsampa]

Hello Sir

i have searched for the specification of atto pixel premium but i couldn't find it
can you help me with it ?

how may tuner it haves and its type  ??

Hi, I think is base on U5-PVR because when analysing firmware can get some info about it but not use tvheadend.
You can check some info here: https://www.atto.tv/atto-pixel-premium/

Details:
1x USB 3.0
1x USB 2.0
1x microSD slot
1x AV socket
1x S / PDIF optics
1x HDMI 2.0a, HDCP 2.2, HDCP1.4
1x LAN connector RJ-45 10/100/1000 Mbps
2x 2.5 GHz / 5.8 GHz dual band antenna
1x 12 V, 2 A power connection

SoC: Hi3798Mv200
NAND: 8GB
RAM: 2GB
GPU: Mali450
SO: Android

[Midozalouk]

Sorry for inconvenience
But FERGUSON U5 PVR don't support 4k Netflix
?

Can you please tell me how many tuner it haves?

And what about tuner sensitivity?

Thanks sir

[Midozalouk]

Sorry for inconvenience
But FERGUSON U5 PVR don't support 4k Netflix
?

Can you please tell me how many tuner it haves?

And what about tuner sensitivity?

Thanks sir

Is it type dvb s2 or sx2?

[leandrotsampa]

Sorry for inconvenience
But FERGUSON U5 PVR don't support 4k Netflix
?

Can you please tell me how many tuner it haves?

And what about tuner sensitivity?

Thanks sir

Is it type dvb s2 or sx2?

I'm not know about netflix, but have some videos on YouTube maybe you can find some usefull.

1x DVB-C Triple
2x DVB-S/S2

In DVB-C sensitivity is good and DVB-S/S2 I'm not know.

[Midozalouk]

Hello sir
Any updates on how to install it to other STBs
?
Thanks sir

[M4RDUK]

Hi guys, I'm working on my hisilicon STB SoC Hi3798Cv200.
I maked a full rootfs Debian Buster for developer and added Enigma2, RetroArch and now KODI 19-alpha.
For now, I added support for HW Video Decoding on KODI and it's working good and I want add HW Audio Decoder too but my problem is, if I add support in DVDCodecs\Audio how I can handle AddData function? is possible get Audio ES?

Info



Whitout HW Video Decoding



With HW Video Decoding

Hi, I have a duosat next fx lite with the same soc, is it possible to install it on it? I really want to use enigma2 on the device

[Dukar]

You know that KODI does support PVR and retroArch kernels to play games, right? So instead of basing everything on Enigma you could just directly run KODI and basically do the same. Yes, there is no games library yet, but instead of working on this odd hybrid you could work on the games library as well

Indeed, KODI's support for PVR and RetroArch kernels for gaming is impressive. Emphasizing KODI's capabilities and developing a dedicated games library could enhance the overall experience, attracting more gaming enthusiasts.