Posts: 8
Joined: Oct 2003
Reputation:
0
i have exactly the same problem as max.
i'm running a small hard drive, with an old messiahx modchip on a 1.0 xbox.
xbmc 12th october version freezes just after evox launch screen, though 7th october one started fine.
i have tried to delete face008 in udata an tdata folders, without any success.
any clue ?
thanks for your help
Posts: 10,520
Joined: Sep 2003
Reputation:
10
Gamester17
Team-XBMC Forum Moderator
Posts: 10,520
try shutdown, physicaly disconnect you network cable and bootup without network cable connected (known evox bug)
Posts: 2
Joined: Oct 2003
Reputation:
0
i had that problem until i installed the oct 13th build and used the included config.xml.
here's what i did
1. empty tdata\0face007 and udata\0face007 folders completely
2. blow away the xbmp folder contents
3. copy the new xbmp files
4. examine the config.xml contents:
-i went static on the address, subnet and gateway
<address>192.168.0.4</address>
<subnet>255.255.255.0</subnet>
<gateway>192.168.0.1</gateway>
-i disabled the nameserver just in case it was giving me grief.
<nameserver*>192.168.0.1</nameserver*>
-i added the line:
<home>f:\apps\xbmp</home>
Posts: 1,899
Joined: Sep 2003
Reputation:
0
i have the startup problem if my xbox is set to 19:9 (pal). xbmc is set to 4:3 by default. so i first have to set mx xbox (in the ms dash) to 4:3, start xbmc and set it to 16:9 in the setings screen. then reboot, chnage the xbox to 16:9 in the ms das again and start xbmc. having fun. joy!!
read the xbmc
online-manual,
faq and
search the forums before posting! do not e-mail the xbmc-team asking for support!
read/follow the
forum rules! note! team-xbmc never have and never will host or distribute ms-xdk binaries/executables!