[johalareewi]

I have Raspberry Pi2 and am looking to have it running as a frontend to my MythTV (0.27) backend.
I have been trying out OpeneELEC with the Myth pvr add on.
Currently I have Openelec 5.0.6 and the pvr.mythtv 1.12 (installed from zip file).
All was going well until a Pi reboot.

Now when the Pi2 boots, there is a pause then this comes up
*** Error in mount_storage: mount_common: could not mount /dev/mmcblk0p2 ***
### Starting debugging shell... type exit to quit ###
sh: can't access tty; job control turned off
#

I did get this once before when I was testing OpenELEC on a Pi1 model B, and I just reinstalled the latest OpeneELEC.
Looking for some hints on what to do next in this situation.

[nickr]

fdisk /dev/mmcblk0p2

[johalareewi]

reinstall openelec 5.0.6 and pvr-mythtv 1.12 seems to have done the trick.
I did try out a few themes previously.
Gave them a miss this time.
Just sticking with confluence for the time being.

[johalareewi]

update: Looks like there could be a problem with RPi2 and some MicroSD cards.

https://www.raspberrypi.org/forums/viewt...28&t=98935

https://github.com/raspberrypi/firmware/issues/397