Login at Kodi Home

graysky · (This post was last modified: 2018-09-01, 16:54 by graysky.)

I am running Kodi on Arch ARM on an ODROID-C2. When playing back 1080p content, the CPU usage is approaching 100% on all 4 cores. As well, playback becomes choppy. Here is the debug log. When I hit "O" while play back is enabled, Kodi is using ff-h264 (SW). Perhaps I do not have the correct drivers installed for accelerated playback?

The distro package pulled down: odroid-c2-libgl-fb r6p1-3 which has the description of, "ODROID-C2 Mali driver (framebuffer)."

asavah · (This post was last modified: 2018-09-01, 00:00 by asavah.)

c:
17:08:37.297 T:547893039120 ERROR: AML: no rw on /dev/amstream*

17:08:37.297 T:547893039120 ERROR: AML: no rw on /sys/class/ppmgr/ppmgr_3d_mode

17:08:37.297 T:547893039120 ERROR: AML: no rw on /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq

17:08:37.297 T:547893039120 ERROR: AML: no rw on /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq

17:08:37.297 T:547893039120 ERROR: AML: no rw on /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor



17:09:04.833 T:546962382464 DEBUG: FactoryCodec - Video: amcodec - Opening

17:09:04.833 T:546962382464 ERROR: AML: no proper permission, please contact the device vendor. Skipping codec...

17:09:04.833 T:546962382464 DEBUG: FactoryCodec - Video: amcodec - Failed

Fix your permissions via udev, rw access to the nodes mentioned in the error is needed.
Friendly advice: stay away from amlogic until they provide a proper, usable, free of crap, non-ancient kernel.
You also need libamcodec dynamically loaded by kodi at runtime which can be obtained from amlogic buildroot.

graysky · (This post was last modified: 2018-09-01, 00:34 by graysky.)

Thanks for the quick reply... The permissions look ok, no?

Code:
% ls -lh /dev/amst*

crw-rw-rw- 1 root video 255, 1 Jul  5 15:44 /dev/amstream_abuf

crw-rw-rw- 1 root video 255, 8 Jul  5 15:44 /dev/amstream_hevc

crw-rw-rw- 1 root video 255, 3 Jul  5 15:44 /dev/amstream_mpps

crw-rw-rw- 1 root video 255, 2 Jul  5 15:44 /dev/amstream_mpts

crw-rw-rw- 1 root video 255, 4 Jul  5 15:44 /dev/amstream_rm

crw-rw-rw- 1 root video 255, 5 Jul  5 15:44 /dev/amstream_sub

crw-rw-rw- 1 root video 255, 6 Jul  5 15:44 /dev/amstream_sub_read

crw-rw-rw- 1 root video 255, 7 Jul  5 15:44 /dev/amstream_userdata

crw-rw-rw- 1 root video 255, 0 Jul  5 15:44 /dev/amstream_vbuf

The kodi user is in the right groups I think:

Code:
% id kodi

uid=977(kodi) gid=977(kodi) groups=977(kodi),90(network),98(power),5(tty),995(audio),994(disk),993(input),990(optical),988(storage),986(video)

I do not have /sys/class/ppmgr/ppmgr_3d_mode at all:

Code:
% ls -lh /sys/class/ppmgr/             

total 0

-rw-rw-r-- 1 root root 4.0K Dec 31  1969 angle

-rw-r--r-- 1 root root 4.0K Dec 31  1969 bypass

-rw-r--r-- 1 root root 4.0K Dec 31  1969 disable_prot

-rw-rw-rw- 1 kodi kodi 4.0K Jul  5 15:44 disp

-rw-r--r-- 1 root root 4.0K Dec 31  1969 info

-rw-r--r-- 1 root root 4.0K Dec 31  1969 mirror

-rw-r--r-- 1 root root 4.0K Dec 31  1969 orientation

-rw-r--r-- 1 root root 4.0K Dec 31  1969 platform_type

lrwxrwxrwx 1 root root    0 Dec 31  1969 ppmgr -> ../../devices/virtual/ppmgr/ppmgr

-r--r--r-- 1 root root 4.0K Dec 31  1969 ppmgr_vframe_states

-rw-rw-rw- 1 kodi kodi 4.0K Jul  5 15:44 ppscaler

-rw-rw-rw- 1 kodi kodi 4.0K Jul  5 15:44 ppscaler_rect

-rw-r--r-- 1 root root 4.0K Dec 31  1969 rect

-rw-rw-r-- 1 root root 4.0K Dec 31  1969 vtarget

I do see the problem on the CPU stuff:

Code:
% ls -l /sys/devices/system/cpu/cpu0/cpufreq|grep scal

-r--r--r-- 1 root root 4096 Aug 31 18:31 scaling_available_frequencies

-r--r--r-- 1 root root 4096 Aug 31 18:31 scaling_available_governors

-r--r--r-- 1 root root 4096 Aug 31 18:31 scaling_cur_freq

-rw-r--r-- 1 root root 4096 Aug 31 18:31 scaling_dflt_freq

-r--r--r-- 1 root root 4096 Aug 31 18:31 scaling_driver

-rw-r--r-- 1 root root 4096 Aug 31 18:31 scaling_governor

-rw-r--r-- 1 root root 4096 Aug 31 18:31 scaling_max_freq

-rw-r--r-- 1 root root 4096 Aug 31 18:31 scaling_min_freq

-rw-r--r-- 1 root root 4096 Aug 31 18:31 scaling_setspeed

It seems as though the package provides /etc/tmpfiles.d/kodi_permissions.conf which contains:

Code:
m /sys/class/graphics/fb0/mode 0666 kodi kodi - -

m /sys/class/graphics/fb0/blank 0666 kodi kodi - -

m /sys/class/graphics/fb0/free_scale 0666 kodi kodi - -

m /sys/class/graphics/fb0/free_scale_axis 0666 kodi kodi - -

m /sys/class/graphics/fb0/request2XScale 0666 kodi kodi - -

m /sys/class/graphics/fb0/scale_width 0666 kodi kodi - -

m /sys/class/graphics/fb0/scale_height 0666 kodi kodi - -

m /sys/class/graphics/fb1/blank 0666 kodi kodi - -

m /sys/class/graphics/fb1/scale_width 0666 kodi kodi - -

m /sys/class/graphics/fb1/scale_height 0666 kodi kodi - -

m /sys/class/graphics/fb1/free_scale 0666 kodi kodi - -

m /sys/class/graphics/fb1/scale 0666 kodi kodi - -

m /sys/class/graphics/fb1/scale_axis 0666 kodi kodi - -

m /sys/class/display/mode 0666 kodi kodi - -

m /sys/class/display/axis 0666 kodi kodi - -

m /sys/class/amhdmitx/amhdmitx0/disp_mode 0666 kodi kodi - -

m /sys/class/tsync/pts_pcrscr 0666 kodi kodi - -

m /sys/class/tsync/enable 0666 kodi kodi - -

m /sys/class/video/axis 0666 kodi kodi - -

m /sys/class/video/zoom 0666 kodi kodi - -

m /sys/class/video/contrast 0666 kodi kodi - -

m /sys/class/video/brightness 0666 kodi kodi - -

m /sys/class/video/saturation 0666 kodi kodi - -

m /sys/class/video/blackout_policy 0666 kodi kodi - -

m /sys/class/video/screen_mode 0666 kodi kodi - -

m /sys/class/video/disable_video 0666 kodi kodi - -

m /sys/class/audiodsp/digital_raw 0666 kodi kodi - -

m /sys/class/ppmgr/ppmgr_3d_mode 0666 kodi kodi - -

m /sys/class/ppmgr/ppscaler 0666 kodi kodi - -

m /sys/class/ppmgr/ppscaler_rect 0666 kodi kodi - -

m /sys/class/ppmgr/disp 0666 kodi kodi - -

m /sys/modules/di/parameters/bypass_all 0666 kodi kodi - -

asavah · 2018-09-01, 01:08

Honestly I don't remember all the amlogic details as I use my odroid-c2 mostly as paperweight.

pppmgr_3dmode is not critical, if memory serves it's a kernel .config options that needs to be enabled.
cpu scaling is also not critical.

Here is what Kodi does to check the perms https://github.com/xbmc/xbmc/blob/Krypto...ls.cpp#L95

The permissions do look ok ...
Maybe https://forum.odroid.com/viewtopic.php?f...29#p204198

graysky · (This post was last modified: 2018-09-01, 03:28 by graysky.)

Thanks for your help. I agree that the level of stable support in the C2 is disappointing. If that thread is correct, and that gcc needs to be <7.0, that is just stupid.

graysky · 2018-09-01, 16:54

Got it figured out.... I was building from the official xbmc source on github. Turns out there are needed patches for this hardware to work properly which are contained in https://github.com/Owersun/xbmc